TN 12th Physics 2nd Mid Term Exam 2025 Most Important Numerical Problems with Solutions & Formula Sheet PDF

Welcome dear Class 12 students! Scoring full marks in Physics requires mastering the Compulsory 2-Mark and 3-Mark Numerical Problems. To make your Second Mid Term Exam and Public Exam preparation super easy, we have analysed all 11 Districts' Original 2nd Mid Term 2025 Question Papers and compiled the Top 16 Most Repeated Numerical Problems unit-wise (Units 6, 7, 8, and 9) along with a Quick Formula Cheat Sheet and 100% textbook-accurate step-by-step solutions.

📥 Direct PDF Downloads for Offline Study & Printing:

👉 1. Numerical Problems with Solutions PDF: Download Top 16 Physics Numerical Problems with Solutions PDF

👉 2. All-in-One Master Question Bank PDF: Download 12th Physics All-in-One Master Question Bank PDF
💡 Exam Tip for Full Marks in Physics Problems:
In Tamil Nadu Board valuation, step-marks are allotted strictly for: 1) Given Data → 2) Formula (1/2 or 1 Mark) → 3) Substitution & Calculation → 4) Final Answer with proper SI Unit (1/2 Mark). Practice all 16 problems below using this exact format!

📱 Scan for All-in-One Master Question Bank

📱 Scan for Top 16 Numerical Problems Solutions


UNIT 6 & 7: RAY OPTICS & WAVE OPTICS

📌 Quick Formula Cheat Sheet (Units 6 & 7)

  • Lens Power for Myopia (Nearsightedness): Focal length \(f = -x\) (where \(x\) is far point distance);   Power \(P = \dfrac{1}{f}\text{ (in dioptre D)}\), when \(f\) is in metre.
  • Astronomical Telescope (Normal Adjustment): Magnification \(m = \dfrac{f_o}{f_e}\);   Tube length (separation between lenses) \(L = f_o + f_e\).
  • Interference Maximum & Minimum Intensity Ratio: \(\dfrac{I_{\max}}{I_{\min}} = \left(\dfrac{a_1 + a_2}{a_1 - a_2}\right)^2\) (since \(I \propto a^2\), where \(a_1, a_2\) are amplitudes).
  • Young's Double Slit Experiment: Fringe width (bandwidth) \(\beta = \dfrac{\lambda D}{d}\);   Distance of \(n^{\text{th}}\) bright fringe from centre \(y_n = n\dfrac{\lambda D}{d} = n\beta\).
  • Fresnel's Distance: \(z = \dfrac{a^2}{2\lambda}\) (where \(a\) = width of aperture/slit, \(\lambda\) = wavelength of light).
  • Diffraction Grating: \(\sin\theta = N m \lambda \implies \lambda = \dfrac{\sin\theta}{N m}\) (where \(N\) = number of slits per metre, \(m\) = order, \(\theta\) = angle of diffraction).
  • Brewster's Law (Polarisation by Reflection): \(n = \tan i_p\);   Angle of inclination of plate with horizontal surface \(= 90^\circ - i_p\).

Problem 1: Myopia / Nearsightedness Lens Power [Asked in: Dharmapuri, Thoothukudi]

Question: Calculate the power of the lens of the spectacles needed to rectify the defect of nearsightedness for a person who could see clearly up to a distance of \(1.8\text{ m}\).

Given Data:

  • Far point distance for nearsightedness (myopia), \(x = 1.8\text{ m}\)

Formula:

$$f = -x \quad \text{and} \quad P = \dfrac{1}{f} = -\dfrac{1}{x}$$

Substitution & Calculation:

$$f = -1.8\text{ m}$$ $$P = \dfrac{1}{-1.8\text{ m}} = -\dfrac{10}{18}\text{ D} = -0.56\text{ D}$$

Result: The power of the correcting concave lens needed is \(\mathbf{P = -0.56\text{ dioptre } (-0.56\text{ D})}\).

Problem 2: Astronomical Telescope Magnification & Tube Length [Asked in: Virudhunagar]

Question: A small telescope has an objective lens of focal length \(125\text{ cm}\) and an eyepiece of focal length \(2\text{ cm}\).
a) What is the magnification of the telescope?
b) What is the separation between the objective and eyepiece?

Given Data:

  • Focal length of the objective lens (\(f_o\)) \(= 125\text{ cm}\)
  • Focal length of the eyepiece (\(f_e\)) \(= 2\text{ cm}\)

Formula:

$$\text{a) Magnification: } m = \dfrac{f_o}{f_e} \qquad \text{b) Separation (Tube length): } L = f_o + f_e$$

Substitution & Calculation:

$$\text{a) } m = \dfrac{125\text{ cm}}{2\text{ cm}} = 62.5\text{ (No unit)}$$ $$\text{b) } L = 125\text{ cm} + 2\text{ cm} = 127\text{ cm} = 1.27\text{ m}$$

Result: a) Magnification \(m = \mathbf{62.5}\);   b) Separation between objective and eyepiece \(L = \mathbf{127\text{ cm } (1.27\text{ m})}\).

Problem 3: Interference Maximum & Minimum Intensity Ratio [Asked in: Cuddalore, Ranipet, Virudhunagar — Very Important]

Question: Two light sources with amplitudes \(5\text{ units}\) and \(3\text{ units}\) respectively interfere with each other. Calculate the ratio of maximum and minimum intensities.

Given Data:

  • Amplitude of first wave (\(a_1\)) \(= 5\text{ units}\)
  • Amplitude of second wave (\(a_2\)) \(= 3\text{ units}\)

Formula:

$$\dfrac{I_{\max}}{I_{\min}} = \left(\dfrac{a_1 + a_2}{a_1 - a_2}\right)^2$$

Substitution & Calculation:

$$\dfrac{I_{\max}}{I_{\min}} = \left(\dfrac{5 + 3}{5 - 3}\right)^2 = \left(\dfrac{8}{2}\right)^2 = \dfrac{64}{4} = \dfrac{16}{1}$$

Result: The ratio of maximum and minimum intensities is \(\mathbf{I_{\max} : I_{\min} = 16 : 1}\) (No unit).

Problem 4: Young's Double Slit Experiment (Fringe Width & Bright Fringe Distance) [Asked in: Tenkasi]

Question: In Young's double slit experiment, the two slits are \(0.15\text{ mm}\) apart. The light source has a wavelength of \(450\text{ nm}\). The screen is \(2\text{ m}\) away from the slits.
a) Find the distance of second bright fringe from central maximum.
b) Find the fringe width.

Given Data:

  • Distance between the two slits (\(d\)) \(= 0.15\text{ mm} = 0.15 \times 10^{-3}\text{ m}\)
  • Wavelength of light (\(\lambda\)) \(= 450\text{ nm} = 450 \times 10^{-9}\text{ m}\)
  • Distance of the screen from the slits (\(D\)) \(= 2\text{ m}\);   Order of bright fringe (\(n\)) \(= 2\)

Formula:

$$\text{a) Distance of } n^{\text{th}} \text{ bright fringe: } y_n = n\dfrac{\lambda D}{d} \qquad \text{b) Fringe width: } \beta = \dfrac{\lambda D}{d}$$

Substitution & Calculation:

$$\text{a) } y_2 = 2 \times \dfrac{450 \times 10^{-9} \times 2}{0.15 \times 10^{-3}} = \dfrac{1800 \times 10^{-9}}{0.15 \times 10^{-3}} = 12 \times 10^{-3}\text{ m} = 12\text{ mm}$$ $$\text{b) } \beta = \dfrac{450 \times 10^{-9} \times 2}{0.15 \times 10^{-3}} = \dfrac{900 \times 10^{-9}}{0.15 \times 10^{-3}} = 6 \times 10^{-3}\text{ m} = 6\text{ mm}$$

Result: a) Distance of second bright fringe \(y_2 = \mathbf{12 \times 10^{-3}\text{ m } (12\text{ mm})}\);   b) Fringe width \(\beta = \mathbf{6 \times 10^{-3}\text{ m } (6\text{ mm})}\).

Problem 5: Fresnel's Distance [Asked in: Dharmapuri]

Question: Calculate the distance up to which ray optics is a good approximation for light of wavelength \(500\text{ nm}\) falls on an aperture of width \(0.5\text{ mm}\).

Given Data:

  • Wavelength of light (\(\lambda\)) \(= 500\text{ nm} = 500 \times 10^{-9}\text{ m} = 5 \times 10^{-7}\text{ m}\)
  • Width of the aperture (\(a\)) \(= 0.5\text{ mm} = 0.5 \times 10^{-3}\text{ m} = 5 \times 10^{-4}\text{ m}\)

Formula:

$$z = \dfrac{a^2}{2\lambda}$$

Substitution & Calculation:

$$z = \dfrac{(5 \times 10^{-4})^2}{2 \times 5 \times 10^{-7}} = \dfrac{25 \times 10^{-8}}{10^{-6}} = 25 \times 10^{-2}\text{ m} = 0.25\text{ m}$$

Result: Fresnel's distance \(z = \mathbf{0.25\text{ m } (\text{or } 25\text{ cm})}\).

Problem 6: Diffraction Grating — Finding Wavelength (\(\lambda\)) [Asked in: Thanjavur, Tiruvannamalai, Virudhunagar — Very Important]

Question: A diffraction grating consisting of \(4000\text{ slits per centimetre}\) is illuminated with a monochromatic light that produces the second order diffraction maximum at an angle of \(30^\circ\). What is the wavelength of the light used?

Given Data:

  • Number of slits per unit length (\(N\)) \(= 4000\text{ slits/cm} = \dfrac{4000}{10^{-2}}\text{ m}^{-1} = 4 \times 10^5\text{ slits/m}\)
  • Order of diffraction (\(m\)) \(= 2\);   Angle of diffraction (\(\theta\)) \(= 30^\circ\)

Formula:

$$\sin\theta = N m \lambda \implies \lambda = \dfrac{\sin\theta}{N m}$$

Substitution & Calculation:

$$\lambda = \dfrac{\sin 30^\circ}{4 \times 10^5 \times 2} = \dfrac{0.5}{8 \times 10^5} = 0.0625 \times 10^{-5}\text{ m} = 6.25 \times 10^{-7}\text{ m} = 6250\text{ Å}$$

Result: The wavelength of the light used is \(\mathbf{\lambda = 6.25 \times 10^{-7}\text{ m } (\text{or } 625\text{ nm} / 6250\text{ Å})}\).

Problem 7: Diffraction Grating — Finding Number of Slits per cm (\(N\)) [Asked in: Tirupattur]

Question: A monochromatic light of wavelength of \(500\text{ nm}\) strikes a grating and produces fourth order maximum at an angle of \(30^\circ\). Find the number of slits per centimetre.

Given Data:

  • Wavelength (\(\lambda\)) \(= 500\text{ nm} = 5 \times 10^{-7}\text{ m}\);   Order (\(m\)) \(= 4\);   Angle (\(\theta\)) \(= 30^\circ\)

Formula:

$$\sin\theta = N m \lambda \implies N = \dfrac{\sin\theta}{m\lambda}$$

Substitution & Calculation:

$$N = \dfrac{\sin 30^\circ}{4 \times 5 \times 10^{-7}\text{ m}} = \dfrac{0.5}{20 \times 10^{-7}\text{ m}} = 2.5 \times 10^5\text{ slits/m}$$ $$\text{Number of slits per centimetre} = \dfrac{2.5 \times 10^5}{100} = 2500\text{ slits/cm}$$

Result: The number of slits per centimetre is \(\mathbf{N = 2500\text{ slits cm}^{-1}}\).

Problem 8A: Brewster's Law — Refractive Index of Water [Asked in: Thanjavur, Tiruvannamalai]

Question: The polarising angle for water is \(53.1^\circ\). Calculate the refractive index of the water.

  • Given Data: Polarising angle (\(i_p\)) \(= 53.1^\circ\)
$$n = \tan i_p = \tan(53.1^\circ) = \mathbf{1.33\text{ (No unit)}}$$

Problem 8B: Brewster's Law — Inclination of Glass Plate [Asked in: Dharmapuri]

Question: What is the angle at which a glass plate of refractive index \(1.65\) is to be kept with respect to the horizontal surface so that an unpolarised light travelling horizontal after reflection from the glass plate is found to be plane polarised?

  • Given Data: Refractive index (\(n\)) \(= 1.65\)
$$\tan i_p = n = 1.65 \implies i_p = \tan^{-1}(1.65) = 58.8^\circ$$ $$\text{Angle with horizontal surface} = 90^\circ - i_p = 90^\circ - 58.8^\circ = \mathbf{31.2^\circ}$$

UNIT 8: DUAL NATURE OF RADIATION AND MATTER

📌 Quick Formula Cheat Sheet (Unit 8)

  • X-Ray Cut-off Wavelength & Cut-off Frequency: \(\lambda_0 = \dfrac{12400}{V}\text{ Å}\) (where \(V\) is accelerating potential in volts);   Cut-off frequency \(\nu_0 = \dfrac{c}{\lambda_0}\) (where \(c = 3 \times 10^8\text{ m s}^{-1}\)).
  • de Broglie Wavelength of Accelerated Electron: \(\lambda = \dfrac{h}{\sqrt{2meV}} = \dfrac{12.27}{\sqrt{V}}\text{ Å}\).
  • Energy of a Photon: \(E = \dfrac{hc}{\lambda}\text{ (in Joules)}\)   or   \(E = \dfrac{hc}{\lambda e}\text{ (in eV)}\). Photoelectric emission occurs ONLY if \(E > \phi_0\) (work function).
  • Number of Photons Emitted per Second from a Source of Power \(P\): \(n_p = \dfrac{P}{E} = \dfrac{P\lambda}{hc}\).

Problem 9: X-Ray Cut-off Wavelength & Cut-off Frequency [Asked in 7 Districts: Cuddalore, Dharmapuri, Ranipet, Salem, Thanjavur, Tiruvannamalai, Virudhunagar — #1 Most Repeated!]

Question: Calculate the cut-off wavelength and cut-off frequency of X-rays from an X-ray tube of accelerating potential \(20,000\text{ V}\).

Given Data:

  • Accelerating potential (\(V\)) \(= 20,000\text{ V}\);   Speed of light (\(c\)) \(= 3 \times 10^8\text{ m s}^{-1}\)

Formula:

$$\text{1) Cut-off wavelength: } \lambda_0 = \dfrac{12400}{V}\text{ Å} \qquad \text{2) Cut-off frequency: } \nu_0 = \dfrac{c}{\lambda_0}$$

Substitution & Calculation:

$$\text{1) } \lambda_0 = \dfrac{12400}{20000}\text{ Å} = 0.62\text{ Å} = 0.62 \times 10^{-10}\text{ m}$$ $$\text{2) } \nu_0 = \dfrac{3 \times 10^8\text{ m s}^{-1}}{0.62 \times 10^{-10}\text{ m}} = 4.84 \times 10^{18}\text{ Hz}$$

Result: Cut-off wavelength \(\lambda_0 = \mathbf{0.62\text{ Å}}\);   Cut-off frequency \(\nu_0 = \mathbf{4.84 \times 10^{18}\text{ Hz}}\).

Problem 10: Photoelectric Emission Condition Check (Silver Surface) [Asked in: Dharmapuri, Virudhunagar]

Question: A radiation of wavelength \(300\text{ nm}\) is incident on a silver surface. Will photoelectrons be observed? [Work function of silver \(= 4.7\text{ eV}\)]

Given Data:

  • Wavelength of incident radiation (\(\lambda\)) \(= 300\text{ nm} = 300 \times 10^{-9}\text{ m}\)
  • Work function of silver (\(\phi_0\)) \(= 4.7\text{ eV}\)

Formula:

$$E\text{ (in eV)} = \dfrac{hc}{\lambda e}$$

Substitution & Calculation:

$$E = \dfrac{6.626 \times 10^{-34} \times 3 \times 10^8}{300 \times 10^{-9} \times 1.6 \times 10^{-19}} = \dfrac{19.878 \times 10^{-26}}{4.8 \times 10^{-26}} = 4.14\text{ eV}$$

Result: Since the incident photon energy (\(E = 4.14\text{ eV}\)) is less than the work function of silver (\(\phi_0 = 4.7\text{ eV}\)), i.e., \(E < \phi_0\), photoelectrons will NOT be observed.

Problem 11: Number of Photons Emitted per Second from a Laser [Asked in: Virudhunagar]

Question: How many photons per second emanate from a \(50\text{ mW}\) laser of \(640\text{ nm}\)?

Given Data:

  • Power of the laser (\(P\)) \(= 50\text{ mW} = 50 \times 10^{-3}\text{ W}\)
  • Wavelength (\(\lambda\)) \(= 640\text{ nm} = 640 \times 10^{-9}\text{ m}\)

Formula:

$$n_p = \dfrac{P}{E} = \dfrac{P\lambda}{hc}$$

Substitution & Calculation:

$$n_p = \dfrac{50 \times 10^{-3} \times 640 \times 10^{-9}}{6.626 \times 10^{-34} \times 3 \times 10^8} = \dfrac{3.2 \times 10^{-8}}{19.878 \times 10^{-26}} = 1.61 \times 10^{17}\text{ photons s}^{-1}$$

Result: The number of photons emanating per second is \(\mathbf{n_p = 1.61 \times 10^{17}\text{ s}^{-1}}\).

Problem 12: de Broglie Wavelength of Accelerated Electrons [Asked in: Thanjavur, Tiruvannamalai]

Question: Calculate the de Broglie wavelength of the electrons when they are accelerated through a potential difference of \(100\text{ V}\).

Given Data:

  • Accelerating potential difference (\(V\)) \(= 100\text{ V}\)

Formula:

$$\lambda = \dfrac{12.27}{\sqrt{V}}\text{ Å}$$

Substitution & Calculation:

$$\lambda = \dfrac{12.27}{\sqrt{100}}\text{ Å} = \dfrac{12.27}{10}\text{ Å} = 1.227\text{ Å} = 1.227 \times 10^{-10}\text{ m}$$

Result: The de Broglie wavelength of the electrons is \(\mathbf{\lambda = 1.227\text{ Å}}\).


UNIT 9: ATOMIC AND NUCLEAR PHYSICS

📌 Quick Formula Cheat Sheet (Unit 9)

  • Bohr Stationary Orbit Standing Wave Condition: Circumference \(2\pi r = n\lambda \implies \lambda = \dfrac{2\pi r}{n}\).
  • Mass-Energy Equivalence (\(1\text{ u}\)): \(E = mc^2\) (where \(1\text{ u} = 1.66 \times 10^{-27}\text{ kg}\);   \(1\text{ eV} = 1.6 \times 10^{-19}\text{ J}\)).
  • Radioactive Decay Time Calculation: Decay constant \(\lambda = \dfrac{0.6931}{T_{1/2}}\);   Time \(t = \dfrac{2.3026}{\lambda}\log_{10}\left(\dfrac{N_0}{N}\right)\) (where \(N\) is the remaining undecayed amount).
  • Nuclear Fission Energy of \(_{92}^{235}\text{U}\): Number of atoms in mass \(M\text{ (in g)}\) is \(N = \dfrac{M}{235} \times 6.023 \times 10^{23}\);   Energy per fission \(= 200\text{ MeV} = 3.2 \times 10^{-11}\text{ J}\).

Problem 13: de Broglie Wavelength of Electron in \(5^{\text{th}}\) Orbit of Hydrogen [Asked in 5 Districts: Dharmapuri, Kanyakumari, Tenkasi, Thanjavur, Tiruvannamalai — #2 Most Repeated!]

Question: The radius of the \(5^{\text{th}}\) orbit of hydrogen atom is \(13.25\text{ Å}\). Calculate the de Broglie wavelength of the electron orbiting in the \(5^{\text{th}}\) orbit.

Given Data:

  • Orbit number (\(n\)) \(= 5\)
  • Radius of the \(5^{\text{th}}\) orbit (\(r\)) \(= 13.25\text{ Å} = 13.25 \times 10^{-10}\text{ m}\)

Formula:

$$2\pi r = n\lambda \implies \lambda = \dfrac{2\pi r}{n}$$

Substitution & Calculation:

$$\lambda = \dfrac{2 \times 3.14 \times 13.25 \times 10^{-10}\text{ m}}{5} = \dfrac{83.21 \times 10^{-10}\text{ m}}{5} = 16.64 \times 10^{-10}\text{ m} = 16.64\text{ Å}$$

Result: The de Broglie wavelength of the electron in the \(5^{\text{th}}\) orbit is \(\mathbf{\lambda = 16.64\text{ Å } (\text{or } 16.64 \times 10^{-10}\text{ m})}\).

Problem 14: Energy Equivalent of \(1\text{ Atomic Mass Unit } (1\text{ u})\) [Asked in: Tirupattur]

Question: Calculate the energy equivalent of \(1\text{ atomic mass unit}\).

Given Data:

  • Mass (\(m\)) \(= 1\text{ u} = 1.66 \times 10^{-27}\text{ kg}\);   Speed of light (\(c\)) \(= 3 \times 10^8\text{ m s}^{-1}\)

Formula:

$$E = m c^2$$

Substitution & Calculation:

$$E = 1.66 \times 10^{-27} \times \left(3 \times 10^8\right)^2 = 1.66 \times 10^{-27} \times 9 \times 10^{16} = 14.94 \times 10^{-11}\text{ J}$$ $$\text{In electron-volts: } E = \dfrac{14.94 \times 10^{-11}\text{ J}}{1.6 \times 10^{-19}\text{ J eV}^{-1}} = 931.5 \times 10^6\text{ eV} = 931.5\text{ MeV}$$

Result: The energy equivalent of \(1\text{ atomic mass unit } (1\text{ u})\) is \(\mathbf{931.5\text{ MeV}}\).

Problem 15: Radioactive Decay Time Calculation (Radon \(60\%\) Decay) [Asked in: Salem]

Question: Calculate the time required for \(60\%\) of a sample of radon to undergo decay. Given: \(T_{1/2}\) of radon \(= 3.8\text{ days}\).

Given Data:

  • Half-life of radon (\(T_{1/2}\)) \(= 3.8\text{ days}\)
  • Amount decayed \(= 60\%\) of \(N_0 \implies\) Remaining undecayed amount (\(N\)) \(= 100\% - 60\% = 40\%\) of \(N_0 = 0.4 N_0\)

Formula:

$$\lambda = \dfrac{0.6931}{T_{1/2}} \qquad \text{and} \qquad t = \dfrac{2.3026}{\lambda}\log_{10}\left(\dfrac{N_0}{N}\right)$$

Substitution & Calculation:

$$\lambda = \dfrac{0.6931}{3.8}\text{ day}^{-1} = 0.1824\text{ day}^{-1}$$ $$t = \dfrac{2.3026}{0.1824} \times \log_{10}\left(\dfrac{N_0}{0.4 N_0}\right) = 12.624 \times \log_{10}(2.5) = 12.624 \times 0.3979 = 5.022\text{ days}$$

Result: The time required for \(60\%\) of the radon sample to decay is \(\mathbf{t = 5.022\text{ days}}\).

Problem 16: Energy Released in Fission of \(1\text{ kg}\) of \(_{92}^{235}\text{U}\) [Asked in: Thoothukudi]

Question: Calculate the amount of energy released in joules when \(1\text{ kg}\) of \(_{92}^{235}\text{U}\) undergoes fission reaction.

Given Data:

  • Mass of \(_{92}^{235}\text{U} = 1\text{ kg} = 1000\text{ g}\);   Avogadro's number (\(N_A\)) \(= 6.023 \times 10^{23}\)
  • Energy released per fission \(= 200\text{ MeV} = 200 \times 10^6 \times 1.6 \times 10^{-19}\text{ J} = 3.2 \times 10^{-11}\text{ J}\)

Formula:

$$N = \dfrac{\text{Mass in g}}{235} \times N_A \qquad \text{and} \qquad E = N \times \text{Energy per fission}$$

Substitution & Calculation:

$$N = \dfrac{1000}{235} \times 6.023 \times 10^{23} = 2.56 \times 10^{24}\text{ atoms}$$ $$E = 2.56 \times 10^{24} \times 3.2 \times 10^{-11}\text{ J} = 8.192 \times 10^{13}\text{ J}$$

Result: The total energy released in joules is \(\mathbf{E = 8.192 \times 10^{13}\text{ J } (\text{or } 8.208 \times 10^{13}\text{ J})}\).


📚 TN 12th Physics 2nd Mid Term 2025 - Master Guides & All Districts Original Question Papers

Practice more district-wise question papers, master question banks, and full answer keys from the links below to score full marks in your Physics exam: