TN 12th Physics 2nd Mid Term Question Paper 2025 Dharmapuri District with Full Answer Key PDF

Welcome dear Class 12 students! Are you looking for the official Dharmapuri District Second Mid Term Physics Question Paper with complete solutions? In this post, we provide the TN Class 12 Physics Second Mid Term Exam 2025 Original Question Paper for Dharmapuri District (English Medium) along with a 100% textbook-accurate, step-by-step full answer key prepared strictly according to the Tamil Nadu SCERT Samacheer Kalvi textbook and DGE Government valuation scheme.

📥 Download Original Question Paper PDF:
Click the link below to download the official Dharmapuri District 12th Physics 2nd Mid Term 2025 Question Paper:
👉 12th Physics - 2nd Mid Term 2025 Question Paper | Dharmapuri District PDF Download

TN 12th Physics - Second Mid Term Examination 2025 (Dharmapuri District) - Question Paper & Full Answer Key

Class: XII | Subject: Physics | Time: 1.30 Hrs | Total Marks: 50

Part - A: Choose the Most Appropriate Answer (10 × 1 = 10 Marks)

  1. Light transmitted by Nicol prism is:
    a) partially polarised    b) unpolarised    c) plane polarised    d) elliptically polarised
    [Hint: A Nicol prism eliminates the ordinary ray by total internal reflection and transmits only the extraordinary ray, which is completely plane polarised.]
  2. Emission of electrons by the absorption of heat energy is called _________ emission.
    a) photoelectric    b) field    c) thermionic    d) secondary
  3. Ionisation Potential (IP) and Ionisation Energy (IE) are related as:
    a) IP = (IE)e    b) IP = IE / e    c) IE = IP / e2    d) IP = IE / e2
    [Hint: Ionisation Energy IE = e × Vionisation = e × IP ⇒ IP = IE / e.]
  4. A ray of light strikes a glass plate at an angle 60°. If the reflected and refracted rays are perpendicular to each other, the refractive index of the glass is:
    a) √3    b) 3/2    c) √(3/2)    d) 2
    [Hint: By Brewster's law, when reflected and refracted rays are perpendicular, n = tan ip = tan 60° = √3.]
  5. For production of characteristic Kβ X-rays, the electron transition is:
    a) n = 2 → n = 1    b) n = 3 → n = 2    c) n = 3 → n = 1    d) n = 4 → n = 2
    [Hint: Kβ line is produced when an electron jumps from the M-shell (n = 3) to the K-shell (n = 1).]
  6. In J.J. Thomson e/m experiment, electrons accelerated through 2.6 kV enter the region of crossed electric field and magnetic field of strength 3.0 × 104 V m−1 and 1.0 × 10−3 T respectively, and pass through it undeflected, then the specific charge is:
    a) 1.6 × 1010 C kg−1    b) 1.7 × 1011 C kg−1    c) 1.5 × 1011 C kg−1    d) 1.8 × 1011 C kg−1
    [Hint: e/m = E2 / (2VB2) = (3 × 104)2 / (2 × 2600 × (10−3)2) = (9 × 108) / (5.2 × 10−3) = 1.73 × 1011 C kg−1 ≈ 1.7 × 1011 C kg−1.]
  7. The X-ray cannot be diffracted by means of an ordinary grating due to:
    a) large wavelength    b) high speed    c) short wavelength    d) all of the above
    [Hint: For diffraction to occur, the size of the obstacle/slit spacing must be comparable to the wavelength of radiation. X-rays have very short wavelengths (~1 Å) compared to ordinary grating spacing.]
  8. A light of wavelength 500 nm is incident on a sensitive metal plate of photoelectric work function 1.235 eV. The kinetic energy of the photoelectrons emitted is (Take h = 6.6 × 10−34 J s):
    a) 0.58 eV    b) 2.48 eV    c) 1.24 eV    d) 1.16 eV
    [Hint: Energy of incident photon E = hc/λ = 1240 eV·nm / 500 nm = 2.48 eV. Kmax = E − φ0 = 2.48 − 1.235 = 1.245 eV ≈ 1.24 eV.]
  9. Suppose an alpha particle accelerated by a potential of V volt is allowed to collide with a nucleus whose atomic number is Z, then the distance of closest approach of alpha particle to the nucleus is:
    a) 14.4 (Z / V) Å    b) 14.4 (V / Z) Å    c) 1.44 (Z / V) Å    d) 1.44 (V / Z) Å
    [Hint: Kinetic energy of α-particle (charge 2e) accelerated by V volts is Ek = 2eV. Distance of closest approach r0 = (1/4πε0)(2Ze2 / 2eV) = (9 × 109 × 1.6 × 10−19) (Z/V) = 14.4 × 10−10 (Z/V) m = 14.4 (Z/V) Å.]
  10. The wavelength of the matter wave is independent of:
    a) mass    b) velocity    c) momentum    d) charge
    [Hint: de Broglie wavelength λ = h / p = h / mv depends on mass, velocity, and momentum, and is completely independent of the charge of the particle.]

Part - B: Answer any four questions. Question No. 14 is compulsory (4 × 2 = 8 Marks)

11. State Brewster's law.

  • Statement: Brewster's law states that the tangent of the polarising angle for a transparent medium is equal to its refractive index.
  • Formula: tan ip = n
  • Symbols: ip = polarising angle (or Brewster's angle), n = refractive index of the medium (no unit).

12. Calculate the power of the lens of the spectacles needed to rectify the defect of nearsightedness for a person who could see clearly up to a distance of 1.8 m.

Given Data:

  • Far point distance for nearsightedness (myopia), x = 1.8 m

Formula:

Focal length required to rectify myopia: f = −x
Power of the lens: P = 1 / f = −1 / x

Substitution & Calculation:

f = −1.8 m
P = 1 / (−1.8 m) = −10 / 18 = −0.56 D (or −0.55 D)

Result: The power of the correcting concave lens needed is P = −0.56 dioptre (−0.56 D).

13. What is the use of collimator in spectrometer?

  • The collimator in a spectrometer is used to produce a parallel beam of light.
  • It consists of a cylindrical tube with a convex lens (achromatic lens) at one end and an adjustable vertical slit at the other end kept at the principal focus of the lens.

14. [Compulsory Problem] A radiation of wavelength 300 nm is incident on a silver surface. Will photoelectrons be observed? [Work function of silver = 4.7 eV]

Given Data:

  • Wavelength of incident radiation (λ) = 300 nm = 300 × 10−9 m
  • Work function of silver (φ0) = 4.7 eV
  • Planck's constant (h) = 6.626 × 10−34 J s;   Velocity of light (c) = 3 × 108 m s−1

Formula:

Energy of incident photon (in eV): E = hc / (λ × e)

Substitution & Calculation:

E = (6.626 × 10−34 × 3 × 108) / (300 × 10−9 × 1.6 × 10−19)
E = 19.878 × 10−26 / (4.8 × 10−26)
E = 4.14 eV

Conclusion / Result: Since the energy of the incident photon (E = 4.14 eV) is less than the work function of silver (φ0 = 4.7 eV), i.e., E < φ0, photoelectrons will NOT be observed.

15. What is braking radiation?

  • When a fast-moving electron penetrates and approaches a target nucleus, the interaction between the electron and the nucleus either accelerates or decelerates it, which results in a change of path of the electron.
  • The radiation produced from such a decelerating electron is called braking radiation or Bremsstrahlung (which gives rise to continuous X-ray spectrum). The energy of the emitted photon is equal to the loss of kinetic energy of the electron.

16. Give the results of Rutherford alpha scattering experiment.

  1. Most of the alpha particles pass straight through the gold foil undeflected (meaning most of the space in an atom is empty).
  2. A few alpha particles are deflected through small angles.
  3. Very few alpha particles (about 1 in thousands) are deflected through angles greater than 90°, and a very few are bounced back (reflected through 180°), showing that all the positive charge and mass of the atom are concentrated in a very small central core called the nucleus.

Part - C: Answer any four questions. Question No. 21 is compulsory (4 × 3 = 12 Marks)

17. Distinguish between interference and diffraction.

S.No. Interference Diffraction
1. Superposition of waves from two coherent sources. Superposition of waves from various points of the same wavefront.
2. Equally spaced fringes. Unequally spaced fringes.
3. Intensity of all the bright fringes is almost same. Intensity falls rapidly for higher orders.
4. Large number of fringes are obtained. Less number of fringes are obtained.

18. What is the angle at which a glass plate of refractive index 1.65 is to be kept with respect to the horizontal surface so that an unpolarised light travelling horizontal after reflection from the glass plate is found to be plane polarised?

Given Data:

  • Refractive index of the glass plate (n) = 1.65

Formula:

By Brewster's law: tan ip = n ⇒ ip = tan−1(n)
Angle of inclination of the glass plate with respect to the horizontal surface: θ = 90° − ip (glancing angle)

Substitution & Calculation:

tan ip = 1.65
ip = tan−1(1.65) = 58.8° (or 58° 47′)
Inclination with horizontal surface (θ) = 90° − 58.8° = 31.2° (or 31° 13′)

Result: The glass plate must be kept at an angle of 31.2° with respect to the horizontal surface.

19. List out the laws of photoelectric effect.

  1. For a given frequency of incident light, the number of photoelectrons emitted is directly proportional to the intensity of the incident light. The saturation current is also directly proportional to the intensity of incident light.
  2. Maximum kinetic energy of the photoelectrons is independent of the intensity of the incident light.
  3. Maximum kinetic energy of the photoelectrons from a given metal is directly proportional to the frequency of incident light.
  4. For a given surface, the emission of photoelectrons takes place only if the frequency of incident light is greater than a certain minimum frequency called the threshold frequency (ν0).
  5. There is no time lag between the incidence of light and ejection of photoelectrons (less than 10−9 s).

20. Derive an expression for de Broglie wavelength of electrons.

  • Let an electron of mass m and charge e be accelerated from rest through a potential difference of V volts.
  • The kinetic energy (K) acquired by the electron is given by:
    K = ½mv2 = eV  —— (1)
  • From equation (1), the speed of the electron is:
    v = √(2eV / m)  —— (2)
  • Hence, the de Broglie wavelength (λ) of the electron is:
    λ = h / mv = h / √(2meV)  —— (3)
  • Since kinetic energy K = eV, we can also write: λ = h / √(2mK)
  • Substituting the known values (h = 6.626 × 10−34 J s, m = 9.11 × 10−31 kg, e = 1.6 × 10−19 C):
    λ = 12.27 / √V   Å (or 1.227 × 10−9 / √V   m).

21. [Compulsory Problem] Calculate the cut-off wavelength and cut-off frequency of X-rays from an X-ray tube of accelerating potential 20,000 V.

Given Data:

  • Accelerating potential (V) = 20,000 V
  • Speed of light (c) = 3 × 108 m s−1

Formula:

1) Cut-off wavelength: λ0 = 12400 / V   Å
2) Cut-off frequency: ν0 = c / λ0

Substitution & Calculation:

(i) Cut-off wavelength (λ0):
λ0 = 12400 / 20000 Å = 0.62 Å = 0.62 × 10−10 m

(ii) Cut-off frequency (ν0):
ν0 = (3 × 108) / (0.62 × 10−10)
ν0 = 4.84 × 1018 Hz

Result:
1) Cut-off wavelength (λ0) = 0.62 Å (or 0.62 × 10−10 m)
2) Cut-off frequency (ν0) = 4.84 × 1018 Hz

22. Discuss the spectral series of hydrogen atom.

When an electron in a hydrogen atom jumps from a higher energy orbit (m) to a lower energy orbit (n), the wave number (ν̄) of the emitted spectral line is given by Rydberg's formula:
ν̄ = 1 / λ = R [ (1 / n2) − (1 / m2) ]   (where R = 1.097 × 107 m−1 is Rydberg's constant).

  1. Lyman Series: For n = 1 and m = 2, 3, 4,...   The wave number is ν̄ = R [1/12 − 1/m2]. These lines lie in the Ultraviolet (UV) region.
  2. Balmer Series: For n = 2 and m = 3, 4, 5,...   The wave number is ν̄ = R [1/22 − 1/m2]. These lines lie in the Visible region.
  3. Paschen Series: For n = 3 and m = 4, 5, 6,...   The wave number is ν̄ = R [1/32 − 1/m2]. These lines lie in the Near Infrared (IR) region.
  4. Brackett Series: For n = 4 and m = 5, 6, 7,...   The wave number is ν̄ = R [1/42 − 1/m2]. These lines lie in the Middle Infrared (IR) region.
  5. Pfund Series: For n = 5 and m = 6, 7, 8,...   The wave number is ν̄ = R [1/52 − 1/m2]. These lines lie in the Far Infrared (IR) region.

Part - D: Answer all the questions (4 × 5 = 20 Marks)

23. (a) State and obtain Malus' law.

1. Statement of Malus' Law:

When a beam of plane polarised light of intensity I0 is incident on an analyser, the intensity of light (I) transmitted from the analyser varies directly as the square of the cosine of the angle (θ) between the transmission axes of the polariser and the analyser.

I = I0 cos2θ

2. Diagram Description & Proof:

  • Let the angle between the plane of the polariser and the plane of the analyser be θ.
  • Let I0 be the intensity and a be the amplitude of the electric vector transmitted by the polariser.
  • The amplitude a of the incident plane polarised light can be resolved into two rectangular components:
    1. a cos θ — parallel component along the transmission axis of the analyser.
    2. a sin θ — perpendicular component normal to the transmission axis of the analyser.
  • (Diagram Labels to draw: Polariser axis, Analyser axis inclined at angle θ, Amplitude vector 'a', Parallel transmitted component 'a cos θ', Perpendicular blocked component 'a sin θ').

3. Step-by-Step Mathematical Derivation:

  • Only the parallel component (a cos θ) will be transmitted through the analyser, while the perpendicular component (a sin θ) is blocked.
  • Since intensity of light is directly proportional to the square of the amplitude (I ∝ A2), the intensity of light transmitted from the analyser is:
    I ∝ (a cos θ)2
    I = k a2 cos2θ  —— (1)   (where k is a constant of proportionality).
  • Since the incident intensity is I0 = k a2, equation (1) becomes:
Malus' Law:   I = I0 cos2θ

4. Special Cases:

  • Case (i) When θ = 0° or 180° (Parallel axes):
    cos 0° = 1 ⇒ I = I0 (Maximum intensity). When the transmission axes of the polariser and analyser are parallel, the transmitted intensity is equal to the incident intensity.
  • Case (ii) When θ = 90° (Perpendicular / Crossed axes):
    cos 90° = 0 ⇒ I = 0 (Minimum / Zero intensity). When the transmission axes of the polariser and analyser are perpendicular to each other, no light is transmitted from the analyser.

(OR)

23. (b) Explain the J.J. Thomson experiment to determine the specific charge of electron.

1. Principle:

The specific charge (e/m) of an electron is determined based on the principle that cathode rays (beam of electrons) are deflected by electric and magnetic fields.

2. Construction & Diagram Description:

  • A highly evacuated discharge tube is used. Cathode rays are produced at the cathode (C) and attracted towards the anode (A) which has a fine pinhole.
  • The narrow beam of cathode rays passes between two parallel metal plates maintained at a high voltage, providing a uniform downward electric field (E).
  • A uniform magnetic field (B) is applied perpendicular to both the electric field and the direction of motion of the cathode rays using electromagnet coils.
  • At the far end of the tube, the cathode rays strike a flat fluorescent screen (zinc sulphide coating) producing a bright spot at O in the absence of fields.
  • (Diagram Labels to draw: Cathode C, Anode A, Electric field plates + and −, Crossed magnetic field B coils, Fluorescent screen with points O, P).

3. Step-by-Step Mathematical Derivation:

(i) Determination of Velocity (v) of Cathode Rays:

  • For a fixed electric field E, the magnetic field B is adjusted such that the upward electrostatic force (FE = eE) is balanced by the downward Lorentz magnetic force (FB = Bev), bringing the spot back to its original undeflected position O.
  • At equilibrium:   FE = FB
    eE = Bev ⇒ v = E / B  —— (1)

(ii) Determination of Specific Charge (e/m):

  • Let V be the potential difference between the cathode and anode. The potential energy (eV) of the electron at the cathode is converted into kinetic energy (½mv2) at the anode.
  • By law of conservation of energy:
    eV = ½mv2 ⇒ e / m = v2 / 2V
  • Substituting velocity v = E / B from equation (1):
Final Expression:   e / m = E2 / (2 V B2)   (SI Unit: C kg−1)

Substituting the known values, the specific charge of the electron is found to be e/m = 1.7 × 1011 C kg−1.

24. (a) Discuss about the simple microscope and obtain the equations for magnification for near point focusing and normal focusing.

1. Principle of Simple Microscope:

A simple microscope is a single magnifying (convex) lens of small focal length. When an object is placed within its principal focus (u < f), an erect, magnified, and virtual image is formed on the same side of the lens as the object.

2. Case (i): Magnification in Near Point Focusing:

  • Diagram Description: Draw a convex lens with an object AB of height h placed at a distance u (u < f) so that its virtual, erect, and magnified image A'B' of height h' is formed at the least distance of distinct vision D = 25 cm (near point).
  • Linear magnification (m) is given by:
    m = v / u  —— (1)
  • Using the lens equation:
    (1 / v) − (1 / u) = 1 / f
  • Applying sign convention (u = −u, v = −D, f = +f) or multiplying by v:
    1 − (v / u) = v / f ⇒ v / u = 1 − (v / f)
  • Since the image is formed at the near point (v = −D), substituting v = −D gives:
Magnification for Near Point Focusing:   m = 1 + (D / f)

3. Case (ii): Magnification in Normal Focusing (Relaxed Eye):

  • Diagram Description: Draw a convex lens with the object AB placed at the principal focus (u = f) so that the virtual image is formed at infinity (v = ∞) for relaxed viewing.
  • Angular magnification (m) is defined as the ratio of the angle subtended by the image (θi) to the angle subtended by the object (θ0) when placed at the near point D:
    m = θi / θ0  —— (2)
  • For small angles:
    θ0 ≈ tan θ0 = h / D    and    θi ≈ tan θi = h / f
  • Substituting θi and θ0 in equation (2):
    m = (h / f) / (h / D)
Magnification for Normal Focusing:   m = D / f

(OR)

24. (b) What do you mean by electron emission? Explain briefly various methods of electron emission.

1. Electron Emission & Surface Barrier:

  • In metals, the electrons in the outer shells are loosely bound to the atoms and move freely throughout the metal. These are called free electrons.
  • These free electrons cannot leave the surface of the metal on their own because they are attracted back by the positive nuclei inside the metal, creating a potential barrier called the surface barrier.
  • Definition: The liberation of electrons from any surface of a substance is called electron emission. The minimum energy needed by an electron to escape from the metal surface is called work function (φ0), measured in electron-volt (eV).

2. Various Methods of Electron Emission:

Depending on the form of energy supplied to the free electrons, electron emission is classified into four types:

  1. Thermionic Emission:
    When a metal is heated to a high temperature, the free electrons on the surface of the metal get sufficient thermal energy in the form of heat so that they are emitted from the metallic surface. This type of emission is known as thermionic emission. The intensity of thermionic emission depends on the metal used and its temperature.
    Examples: Cathode ray tubes, electron microscopes, X-ray tubes.
  2. Field Emission:
    Electric field emission occurs when a very strong electric field (of the order of 108 V m−1) is applied across the metal. This strong field pulls the free electrons out of the metal surface by overcoming the surface barrier. It takes place at room temperature.
    Examples: Field emission scanning electron microscopes, field-emission display.
  3. Photoelectric Emission:
    When an electromagnetic radiation of suitable high frequency (above threshold frequency) is incident on the surface of the metal, the energy is transferred from the incident radiation to the free electrons. The free electrons get sufficient energy to cross the surface barrier and are emitted. This is called photoelectric emission. The number of electrons emitted is directly proportional to the intensity of the incident radiation.
    Examples: Photo diodes, photoelectric cells.
  4. Secondary Emission:
    When a beam of fast-moving electrons (primary electrons) strikes the surface of the metal, the kinetic energy of the striking electrons is transferred to the free electrons on the metal surface. Thus the free electrons get sufficient kinetic energy so that the secondary emission of electrons occurs.
    Examples: Image intensifiers, photomultiplier tubes.

25. (a) Describe briefly Davisson - Germer experiment which demonstrated the wave nature of electrons.

1. Principle:

De Broglie's hypothesis of matter waves was experimentally confirmed by C.J. Davisson and L.H. Germer in 1927. They demonstrated that a beam of electrons undergoes diffraction when scattered by a single crystal of Nickel, similar to X-ray diffraction.

2. Construction & Diagram Description:

  • The filament F is heated by a low tension (L.T.) battery, which emits electrons by thermionic emission.
  • These electrons are accelerated into a fine beam by an aluminium cylinder with fine holes along its axis, connected to a high tension (H.T.) battery of adjustable voltage V.
  • The fine electron beam strikes a single crystal of Nickel (Ni) target.
  • The electrons scattered in all directions by the atoms of the crystal are received by an electron detector (Faraday cylinder) which can be rotated on a circular scale and is connected to a sensitive galvanometer.
  • (Diagram Labels to draw: Filament F with L.T. battery, Electron gun with H.T. battery, Incident electron beam, Nickel target crystal, Diffracted electron beam at angle θ, Movable Electron Detector on circular scale).

3. Working & Experimental Observation:

  • By keeping the accelerating potential (V) constant, the variation of intensity of the scattered electrons with the angle of scattering (θ) is measured.
  • For an accelerating voltage of V = 54 V, the curve of intensity versus scattering angle shows a sharp peak (maximum intensity) at a scattering angle of θ = 50°.
  • This peak is due to the constructive interference of electron waves diffracted from various atomic layers of the target Nickel crystal.

4. Calculation of Wavelength (Verification):

  • (i) From Experimental Diffraction Data: For Nickel crystal, interplanar spacing d = 0.91 Å and for θ = 50°, the wavelength of the electron wave is found to be:
    λ = 1.65 Å
  • (ii) From de Broglie Equation: For an accelerating potential of V = 54 V, the theoretical de Broglie wavelength is:
    λ = 12.27 / √V   Å = 12.27 / √54   Å
λ = 1.67 Å   (Agrees closely with the experimental value of 1.65 Å)

Conclusion: Since the theoretical value (1.67 Å) and experimental value (1.65 Å) are in close agreement, the wave nature of moving electrons is directly confirmed.

(OR)

25. (b) Derive the energy expression for an electron in the hydrogen atom using Bohr atom model.

1. Principle & Assumptions:

Consider an atom of atomic number Z (for Hydrogen, Z = 1) having a nucleus of charge +Ze around which an electron of mass m and charge −e revolves in the nth circular stationary orbit of radius rn with velocity vn.

2. Step-by-Step Mathematical Derivation:

(i) Potential Energy (Un) of the Electron:

  • The electrostatic potential energy of the electron in the nth orbit is:
    Un = (1 / 4πε0) × [(+Ze)(−e) / rn]
    Un = − (1 / 4πε0) × (Ze2 / rn)  —— (1)

(ii) Kinetic Energy (KEn) of the Electron:

  • Since the Coulomb electrostatic force provides the necessary centripetal force:
    m vn2 / rn = (1 / 4πε0) × (Ze2 / rn2)
    KEn = ½ m vn2 = (1 / 8πε0) × (Ze2 / rn)  —— (2)
  • Comparing equations (1) and (2):   Un = −2 KEn.

(iii) Total Energy (En) in the nth Orbit:

  • Total energy En = KEn + Un = KEn − 2 KEn = −KEn
    En = − (1 / 8πε0) × (Ze2 / rn)  —— (3)
  • From Bohr's atom model, the radius of the nth stationary orbit is:
    rn = (ε0 h2 n2) / (π m Z e2)  —— (4)
  • Substituting equation (4) in equation (3):
En = − (m e4 Z2) / (8 ε02 h2 n2)   (SI Unit: Joule)

3. Special Case for Hydrogen Atom (Z = 1):

  • Substituting Z = 1 and the standard constant values (m, e, ε0, h) and converting Joules into electron-volts:
Total Energy for Hydrogen Atom:   En = −13.6 / n2   eV

26. (a) (i) Write down the postulates of Bohr atom model. (3 Marks)
(ii) The radius of the 5th orbit of hydrogen atom is 13.25 Å. Calculate the de Broglie wavelength of the electron orbiting in the 5th orbit. (2 Marks)

(i) Postulates of Bohr Atom Model:

  1. The electron in an atom moves around the nucleus in circular orbits under the influence of Coulomb electrostatic force of attraction. This Coulomb force gives necessary centripetal force for the electron to undergo circular motion.
  2. Electrons in an atom revolve around the nucleus only in certain discrete orbits called stationary orbits where they do not radiate electromagnetic energy. The angular momentum (l) of the electron in these stationary orbits is quantized:
    l = nh / 2π   (where n = 1, 2, 3,... is the principal quantum number).
  3. Energy of orbits is discrete. An electron can jump from one orbit to another orbit by absorbing or emitting a photon of energy equal to the difference in energies (ΔE) between the two orbital levels:
    ΔE = Efinal − Einitial = hν = hc / λ.

(ii) Numerical Problem:

Given Data:

  • Orbit number (n) = 5
  • Radius of the 5th orbit (r) = 13.25 Å = 13.25 × 10−10 m

Formula:

Condition for stationary orbit: 2πr = nλ ⇒ λ = 2πr / n

Substitution & Calculation:

λ = (2 × 3.14 × 13.25 Å) / 5
λ = 83.21 Å / 5
λ = 16.64 Å (or 16.64 × 10−10 m)

Result: The de Broglie wavelength of the electron in the 5th orbit is λ = 16.64 Å

(OR)

26. (b) (i) What is Fresnel's distance? Obtain the equation for Fresnel's distance. (3 Marks)
(ii) Calculate the distance up to which ray optics is a good approximation for light of wavelength 500 nm falls on an aperture of width 0.5 mm. (2 Marks)

(i) Fresnel's Distance & Derivation:

  • Definition: Fresnel's distance (z) is the distance up to which ray optics is obeyed and beyond which ray optics is not obeyed and wave optics becomes significant.
  • Diagram Description: Draw a slit of width a illuminated by a parallel beam of wavelength λ. Show the central maximum spreading at diffraction angle θ over a distance z (Fresnel's distance) such that the transverse spread equals a / 2 from the central line.
  • Derivation: From the diffraction equation for the first minimum:
    sin θ = λ / a
    For small angles, sin θ ≈ θ = λ / a  —— (1)
  • From the geometry of the diagram, at Fresnel's distance z, the diffraction spread is a / 2, so:
    tan 2θ ≈ 2θ = a / z ⇒ θ = a / 2z  —— (2)
  • Equating equations (1) and (2):
    λ / a = a / 2z
    z = a2 / 2λ

(ii) Numerical Problem:

Given Data:

  • Wavelength of light (λ) = 500 nm = 500 × 10−9 m = 5 × 10−7 m
  • Width of the aperture (a) = 0.5 mm = 0.5 × 10−3 m = 5 × 10−4 m

Formula:

z = a2 / 2λ

Substitution & Calculation:

z = (5 × 10−4)2 / (2 × 5 × 10−7)
z = (25 × 10−8) / (10 × 10−7)
z = (25 × 10−8) / 10−6
z = 25 × 10−2 m = 0.25 m (or 25 cm)

Result: The distance up to which ray optics is a good approximation (Fresnel's distance) is z = 0.25 m (or 25 cm)

📚 TN 12th Physics 2nd Mid Term 2025 - All Districts Original Question Papers & Answer Keys

Practice more district-wise question papers and full answer keys from the links below to score 50/50 in your Physics exam: