TN 12th Physics 2nd Mid Term Question Paper 2025 Tiruvannamalai District with Full Answer Key PDF

Hello Class 12 students! Are you searching for the official Tiruvannamalai District Second Mid Term Physics Question Paper with complete textbook answers? In this post, we share the TN Class 12 Physics Second Mid Term Test 2025 Original Question Paper for Tiruvannamalai District (English Medium) along with a 100% textbook-accurate, step-by-step full answer key prepared strictly according to the Tamil Nadu SCERT Samacheer Kalvi textbook and DGE Government valuation scheme.

📥 Download Original Question Paper PDF:
Click the link below to download the official Tiruvannamalai District 12th Physics 2nd Mid Term 2025 Question Paper:
👉 12th Physics - 2nd Mid Term 2025 Question Paper | Tiruvannamalai District PDF Download

TN 12th Physics - Second Mid Term Test 2025 (Tiruvannamalai District) - Question Paper & Full Answer Key

Class: Std 12 | Subject: Physics | Time: 1.30 Hrs | Marks: 35

Part - I: Choose the Most Appropriate Answer (10 × 1 = 10 Marks)

  1. When light is incident on a soap film of thickness 5 × 10−5 cm, the wavelength of light reflected maximum in the visible region is 5320 Å. Refractive index of the film will be:
    a) 1.22    b) 1.33    c) 1.51    d) 1.83
    [Hint: Condition for maximum reflection in thin film is 2nt = (2m − 1)λ/2. For m = 2, n = 3λ / 4t = (3 × 5320 × 10−10 m) / (4 × 5 × 10−7 m) = 1.33.]
  2. A ray of light strikes a glass plate at an angle 60°. If the reflected and refracted rays are perpendicular to each other, the refractive index of the glass is:
    a) √3    b) 3/2    c) √(3/2)    d) 2
    [Hint: By Brewster's law, when reflected and refracted rays are perpendicular, n = tan ip = tan 60° = √3.]
  3. Light transmitted by Nicol prism is:
    a) partially polarized    b) unpolarised    c) plane polarized    d) elliptically polarised
    [Hint: Nicol prism eliminates the ordinary ray by total internal reflection and transmits only the extraordinary ray which is completely plane polarised.]
  4. If red light in Young's double slit experiment is replaced by monochromatic blue light of same intensity, fringe width will:
    a) decrease    b) increase    c) remain unchanged    d) will become less intense
    [Hint: Fringe width β = λD/d ⇒ β ∝ λ. Since wavelength of blue light (λblue) is smaller than that of red light (λred), the fringe width decreases.]
  5. When a metallic surface is illuminated with radiation of wavelength λ, the stopping potential is V. If the same surface is illuminated with radiation of wavelength 2λ, the stopping potential is V/4. The threshold wavelength for the metallic surface is:
    a) 4λ    b) 5λ    c) (5/2)λ    d) 3λ
    [Hint: eV = hc(1/λ − 1/λ0) and e(V/4) = hc(1/2λ − 1/λ0). Dividing the two equations: 4 = (1/λ − 1/λ0) / (1/2λ − 1/λ0) ⇒ 2/λ − 4/λ0 = 1/λ − 1/λ0 ⇒ 1/λ = 3/λ0 ⇒ λ0 = 3λ.]
  6. Two radiations with photon energies 0.9 eV and 3.3 eV respectively are falling on a metallic surface successively. If the work function of the metal is 0.6 eV, then the ratio of maximum speeds of emitted electrons will be:
    a) 1 : 4    b) 1 : 3    c) 1 : 1    d) 1 : 9
    [Hint: Kmax 1 = 0.9 − 0.6 = 0.3 eV;   Kmax 2 = 3.3 − 0.6 = 2.7 eV. Ratio of maximum speeds v1 / v2 = √(Kmax 1 / Kmax 2) = √(0.3 / 2.7) = √(1 / 9) = 1 : 3.]
  7. A light of wavelength 500 nm is incident on a sensitive plate of photoelectric work function 1.235 eV. The kinetic energy of the photoelectrons emitted is (Take h = 6.6 × 10−34 J s):
    a) 0.58 eV    b) 2.48 eV    c) 1.24 eV    d) 1.16 eV
    [Hint: Energy of incident photon E = hc/λ = 1240 eV·nm / 500 nm = 2.48 eV. Kmax = E − φ0 = 2.48 − 1.235 = 1.245 eV ≈ 1.24 eV.]
  8. In Bohr Atom model, when the principal quantum number (n) increases, the velocity of electron:
    a) increases and then decreases    b) increases    c) decreases    d) remains constant
    [Hint: Velocity of electron in nth orbit is vn ∝ Z/n. Since vn is inversely proportional to n, as n increases, the velocity decreases.]
  9. Atomic number of H-like atom with ionization potential 122.4 V for n = 1 is:
    a) 1    b) 2    c) 3    d) 4
    [Hint: Ionisation potential Vionisation = 13.6 Z2 / n2. For n = 1, 122.4 = 13.6 Z2 ⇒ Z2 = 122.4 / 13.6 = 9 ⇒ Z = 3.]
  10. A person has nearsightedness (printed as farsightedness) with the far distance he could see clearly is 50 cm. The power of the lens of the spectacles needed to rectify the defect is:
    a) 2 D convex lens    b) −2 D concave lens    c) 0.5 D convex lens    d) 0.5 D concave lens
    [Hint: Since the person can see clearly only up to a far distance x = 50 cm = 0.5 m, the defect is nearsightedness (myopia), which requires a concave lens of focal length f = −x = −0.5 m. Power P = 1/f = 1/(−0.5) = −2 D concave lens. (Note: If evaluated as hypermetropia with near point y = 50 cm, P = 1/0.25 − 1/0.50 = +2 D convex lens, option a).]

Part - II: Answer any THREE questions. Question number 15 is compulsory (3 × 2 = 6 Marks)

11. What is Rayleigh's criterion?

  • Statement: According to Rayleigh's criterion, for two point objects to be just resolved by an optical instrument, the central maximum of the diffraction pattern of one point source must fall exactly on the first minimum of the diffraction pattern of the other point source.
  • The minimum angular separation (θ) for two point sources to be just resolved by a circular aperture of diameter a is:
    sin θ ≈ θ = 1.22 λ / a (SI unit of angular separation: radian; spatial minimum distance dmin = 1.22λ / 2n sinβ, SI unit: metre).

12. The polarising angle for water is 53.1°. Calculate the refractive index of the water.

Given Data:

  • Polarising angle for water (ip) = 53.1°

Formula:

By Brewster's law: n = tan ip

Substitution & Calculation:

n = tan (53.1°)
n = 1.33

Result: The refractive index of water is n = 1.33 (No unit).

13. Define stopping potential.

  • Definition: Stopping potential (or cut-off potential) is that value of the negative (retarding) potential given to the collecting electrode (anode) which is just sufficient to stop the most energetic photoelectrons emitted and make the photocurrent zero.
  • Formula: Kmax = ½mvmax2 = eV0 (where V0 is the stopping potential).
  • SI Unit: volt (V).

14. What is meant by Excitation energy?

  • Definition: The energy required to excite an electron from a lower energy state (ground state) to any higher energy state (excited state) is known as excitation energy.
  • For Hydrogen atom, the first excitation energy required to transfer an electron from n = 1 (−13.6 eV) to n = 2 (−3.4 eV) is:
    EI = E2 − E1 = −3.4 − (−13.6) = +10.2 eV.
  • Unit: electron volt (eV) or joule (J).

15. [Compulsory Problem] Calculate the cut-off wavelength of X-rays from an X-ray tube of accelerating potential 20,000 V.

Given Data:

  • Accelerating potential (V) = 20,000 V

Formula:

λ0 = 12400 / V   Å

Substitution & Calculation:

λ0 = 12400 / 20000 Å
λ0 = 124 / 200 Å
λ0 = 0.62 Å (or 0.62 × 10−10 m)

Result: The cut-off wavelength of X-rays is λ0 = 0.62 Å (or 0.62 × 10−10 m).


Part - III: Answer any THREE questions. Question number 20 is compulsory (3 × 3 = 9 Marks)

16. Differentiate between Fresnel and Fraunhofer diffraction.

S.No. Fresnel Diffraction Fraunhofer Diffraction
1. The spherical or cylindrical wavefront undergoes diffraction. The plane wavefront undergoes diffraction.
2. Light wave is from a source at a finite distance. Light wave is from a source at infinity.
3. For laboratory conditions, convex lenses need not be used. In laboratory conditions, convex lenses must be used.
4. Difficult to observe and analyse. Easy to observe and analyse.

17. A diffraction grating consisting of 4000 slits per centimetre is illuminated with a monochromatic light that produces the second order diffraction at an angle of 30°. What is the wavelength of the light used?

Given Data:

  • Number of rulings/slits per unit length (N) = 4000 slits/cm = 4000 / 10−2 m−1 = 4 × 105 lines/m
  • Order of diffraction (m) = 2
  • Angle of diffraction (θ) = 30°

Formula:

Diffraction grating equation: sin θ = N m λ ⇒ λ = sin θ / (N m)

Substitution & Calculation:

λ = sin 30° / (4 × 105 × 2)
λ = 0.5 / (8 × 105)
λ = (1 / 16) × 10−5 m = 0.0625 × 10−5 m
λ = 6.25 × 10−7 m = 625 nm = 6250 Å

Result: The wavelength of the light used is λ = 6.25 × 10−7 m (or 6250 Å).

18. List out the laws of photoelectric effect.

  1. For a given frequency of incident light, the number of photoelectrons emitted is directly proportional to the intensity of the incident light. The saturation current is also directly proportional to the intensity of incident light.
  2. Maximum kinetic energy of the photoelectrons is independent of the intensity of the incident light.
  3. Maximum kinetic energy of the photoelectrons from a given metal is directly proportional to the frequency of incident light.
  4. For a given surface, the emission of photoelectrons takes place only if the frequency of incident light is greater than a certain minimum frequency called the threshold frequency (ν0).
  5. There is no time lag between the incidence of light and ejection of photoelectrons (less than 10−9 s).

19. Write any six properties of Cathode rays.

  1. Cathode rays possess energy and momentum and travel in a straight line with high speed of the order of 107 m s−1.
  2. They can be deflected by the application of electric and magnetic fields. The direction of deflection indicates that they contain negatively charged particles (electrons).
  3. When the cathode rays are allowed to fall on matter, they produce heat.
  4. They affect photographic plates and also produce fluorescence when they fall on certain crystals and minerals.
  5. When the cathode rays fall on a material of high atomic weight, X-rays are produced.
  6. Cathode rays ionize the gas through which they pass, and their speed is up to (1/10)th of the speed of light.

20. [Compulsory Problem] The radius of the 5th orbit of hydrogen atom is 13.25 Å. Calculate the wavelength of the electron in the 5th orbit.

Given Data:

  • Orbit number (n) = 5
  • Radius of the 5th orbit (r) = 13.25 Å = 13.25 × 10−10 m

Formula:

Condition for stationary orbit: 2πr = nλ ⇒ λ = 2πr / n

Substitution & Calculation:

λ = (2 × 3.14 × 13.25 × 10−10) / 5
λ = 83.21 × 10−10 / 5
λ = 16.64 × 10−10 m = 16.64 Å

Result: The de Broglie wavelength of the electron in the 5th orbit is λ = 16.64 Å (or 16.64 × 10−10 m).


Part - IV: Answer all the questions (2 × 5 = 10 Marks)

21. (a) Discuss about astronomical telescope.

1. Principle & Construction:

  • An astronomical telescope is an optical instrument used to get a magnified image of distant heavenly bodies like stars, planets, satellites, and galaxies.
  • It consists of two convex lenses mounted coaxially in a tube:
    1. Objective lens (O): A convex lens of large focal length (fo) and large aperture facing the distant object so that it can collect a large amount of light.
    2. Eyepiece (E): A convex lens of small focal length (fe) and small aperture placed near the observer's eye.

2. Working & Ray Diagram Description:

  • Parallel rays of light from a distant astronomical object make a small angle α at the objective lens and form a real, inverted, and diminished image A'B' at its second principal focus (Fo).
  • This real image A'B' acts as an object for the eyepiece. For normal adjustment (relaxed eye), the eyepiece is adjusted so that A'B' lies exactly at its first principal focus (Fe).
  • Therefore, the final magnified, inverted virtual image is formed at infinity (∞), subtending an angle β at the eyepiece (and the eye).
  • (Diagram Labels to draw: Objective lens of focal length fo, Eyepiece of focal length fe, Incident parallel rays at angle α, Intermediate real inverted image A'B' at common focus Fo / Fe, Emerging parallel rays to infinity at angle β).

3. Step-by-Step Mathematical Derivation for Magnification (m):

  • The angular magnification (m) of an astronomical telescope is defined as the ratio of the angle subtended at the eye by the final image (β) to the angle subtended at the unaided eye (or objective) by the distant object (α):
    m = β / α  —— (1)
  • Since the angles α and β are very small, using the small angle approximation (tan θ ≈ θ):
    From triangle ΔOA'B':   α ≈ tan α = A'B' / fo
    From triangle ΔEA'B':   β ≈ tan β = A'B' / fe
  • Substituting α and β in equation (1):
    m = (A'B' / fe) / (A'B' / fo)
Magnification of Astronomical Telescope (Normal Adjustment):   m = fo / fe

4. Length of the Telescope Tube (L):

  • The approximate length of the astronomical telescope in normal adjustment is the distance between the objective and the eyepiece:
    L = fo + fe (SI Unit: metre).

(OR)

21. (b) Obtain Einstein's photoelectric equation with necessary explanation.

1. Principle (Quantum Concept of Light):

  • According to Einstein, light is composed of discrete packets or quanta of energy called photons, each having energy E = hν and momentum p = h / λ.
  • When a photon of incident light strikes a metal surface, its energy hν is completely absorbed by a single electron inside the metal without any time lag (one-to-one interaction).

2. Diagram Description & Utilization of Photon Energy:

  • (Diagram Labels to draw: Incident photon of energy E = hν striking metal surface, Work function φ0 required to liberate electron, Emitted photoelectron moving with maximum velocity vmax and Kmax = ½mvmax2).
  • The absorbed photon energy (hν) is utilized in two ways:
    1. A part of the photon energy is used as work function (φ0) to overcome the surface barrier and eject the electron from the metal surface.
    2. The remaining part of the energy is imparted as kinetic energy (K) to the ejected photoelectron.

3. Step-by-Step Mathematical Derivation:

  • By the law of conservation of energy:
    hν = φ0 + K  —— (1)   (where K = ½mv2)
  • If the electron does not lose any energy by internal collisions inside the metal before escaping from the surface, it is emitted with maximum kinetic energy (Kmax = ½mvmax2):
    hν = φ0 + Kmax ⇒ Kmax = hν − φ0  —— (2)
  • At the threshold frequency (ν = ν0), the electrons are just ejected with zero kinetic energy (Kmax = 0). Substituting ν = ν0 and Kmax = 0 in equation (2):
    φ0 = hν0  —— (3)
  • Substituting equation (3) in equation (2):
Einstein's Photoelectric Equation:   Kmax = ½ m vmax2 = h(ν − ν0)

22. (a) Derive the expression for the radius of nth orbit of hydrogen atom.

1. Principle & Diagram Description:

  • Consider an atom of atomic number Z having a stationary nucleus of charge +Ze.
  • Let an electron of mass m and charge −e revolve around the nucleus in the nth circular stationary orbit of radius rn with linear velocity vn.
  • (Diagram Labels to draw: Central nucleus with charge +Ze, Circular orbit of radius rn, Revolving electron of charge −e with tangential velocity vector vn, Inward Coulomb electrostatic force Fcol providing centripetal force Fcentripetal).

2. Step-by-Step Mathematical Derivation:

  • By Coulomb's law, the electrostatic force of attraction between the nucleus and the electron is:
    F⃗col = − (1 / 4πε0) (Ze2 / rn2) r̂
  • This Coulomb force provides the necessary centripetal force for the circular motion of the electron:
    F⃗centripetal = − (m vn2 / rn) r̂
  • Equating the magnitudes of Coulomb force and centripetal force:
    (1 / 4πε0) (Ze2 / rn2) = m vn2 / rn
    rn = (Ze2) / (4πε0 m vn2)  —— (1)
  • According to Bohr's angular momentum quantization condition, the angular momentum of the electron in the nth stationary orbit is:
    l = m vn rn = nh / 2π
    vn = nh / (2π m rn)  —— (2)
  • Substituting vn from equation (2) into equation (1):
    rn = (Ze2) / [ 4πε0 m × (n2 h2 / 4π2 m2 rn2) ]
    rn = (Ze2 × 4π2 m2 rn2) / (4πε0 m n2 h2)
  • Simplifying for rn:
Radius of nth Orbit:   rn = (ε0 h2 n2) / (π m Z e2)   (SI Unit: metre)

3. Special Case for Hydrogen Atom (Bohr Radius a0):

  • Since ε0, h, π, m, and e are constants, we can write:
    rn = a0 (n2 / Z)
    where a0 = (ε0 h2) / (π m e2) = 0.529 Å is called the Bohr radius (the radius of the innermost orbit n = 1 of the hydrogen atom with Z = 1).
  • For Hydrogen atom (Z = 1):   rn = a0 n2 = 0.529 n2 Å ⇒ rn ∝ n2.

(OR)

22. (b) (i) Derive an expression for de Broglie wavelength of electrons. (3 Marks)
(ii) Calculate the de Broglie wavelength of the electrons when they are accelerated through a potential difference of 100 V. (2 Marks)

(i) Derivation of de Broglie Wavelength of Electrons:

  • Let an electron of mass m and charge e be accelerated from rest through a potential difference of V volts.
  • The kinetic energy (K) acquired by the electron is given by:
    K = ½mv2 = eV  —— (1)
  • From equation (1), the speed of the electron is:
    v = √(2eV / m)  —— (2)
  • Hence, the de Broglie wavelength (λ) of the electron is:
    λ = h / mv = h / √(2meV)  —— (3)
  • Since kinetic energy K = eV, we can also write: λ = h / √(2mK)
  • Substituting the known constant values (h = 6.626 × 10−34 J s, m = 9.11 × 10−31 kg, e = 1.6 × 10−19 C):
    λ = 12.27 / √V   Å (or 1.227 × 10−9 / √V   m).

(ii) Numerical Problem:

Given Data:

  • Accelerating potential difference (V) = 100 V

Formula:

λ = 12.27 / √V   Å

Substitution & Calculation:

λ = 12.27 / √100   Å
λ = 12.27 / 10   Å
λ = 1.227 Å (or 1.227 × 10−10 m)

Result: The de Broglie wavelength of the electrons is λ = 1.227 Å (or 1.227 × 10−10 m)

📚 TN 12th Physics 2nd Mid Term 2025 - All Districts Original Question Papers & Answer Keys

Practice more district-wise question papers and full answer keys from the links below to score full marks in your Physics exam: