TN 12th Physics 2nd Mid Term Question Paper 2025 Kanyakumari District with Full Answer Key PDF

Welcome dear Class 12 students! Are you looking for the official Kanyakumari District Second Mid Term Physics Question Paper with complete textbook solutions? In this post, we provide the TN Class 12 Physics Common Second Mid Term Test 2025 Original Question Paper for Kanyakumari District (English Medium) along with a 100% textbook-accurate, step-by-step full answer key prepared strictly according to the Tamil Nadu SCERT Samacheer Kalvi textbook and DGE Government valuation scheme.

📥 Download Original Question Paper PDF:
Click the link below to download the official Kanyakumari District 12th Physics 2nd Mid Term 2025 Question Paper:
👉 12th Physics - 2nd Mid Term 2025 Question Paper | Kanyakumari District PDF Download

TN 12th Physics - Common Second Mid Term Test 2025 (Kanyakumari District) - Question Paper & Full Answer Key

Class: Standard 12 | Subject: Physics | Time: 1.30 Hrs | Marks: 35

Part - I: Choose the Most Appropriate Answer (7 × 1 = 7 Marks)

  1. The ratio of resolving powers of an optical microscope for two wavelengths λ1 = 4000 Å and λ2 = 6000 Å is:
    a) 8 : 27    b) 9 : 4    c) 3 : 2    d) 16 : 81
    [Hint: Resolving power of microscope RP = 2n sinβ / (1.22λ) ⇒ RP ∝ 1/λ. Therefore, RP1 / RP2 = λ2 / λ1 = 6000 / 4000 = 3 / 2 = 3 : 2.]
  2. The threshold wavelength for a metal surface whose photoelectric work function is 3.313 eV is:
    a) 4125 Å    b) 3750 Å    c) 6000 Å    d) 2062.5 Å
    [Hint: λ0 = hc / φ0 = 12420 eV·Å / 3.313 eV = 3750 Å.]
  3. If the nuclear radius of 27Al is 3.6 fermi, the approximate nuclear radius of 64Cu is:
    a) 2.4 F    b) 1.2 F    c) 4.8 F    d) 3.6 F
    [Hint: Nuclear radius R = R0 A1/3 ⇒ RCu / RAl = (ACu / AAl)1/3 = (64 / 27)1/3 = 4 / 3. Hence, RCu = (4 / 3) × 3.6 = 4.8 F.]
  4. Highest energy photoelectrons will be produced by:
    a) Gamma rays    b) UV rays    c) Visible light    d) IR rays
    [Hint: By Einstein's photoelectric equation Kmax = hν − φ0, maximum kinetic energy increases with the frequency of incident radiation. Among the given options, Gamma rays have the highest frequency.]
  5. The transverse nature of light is shown in:
    a) Interference    b) Diffraction    c) Scattering    d) Polarisation
    [Hint: Interference and diffraction occur in both longitudinal and transverse waves, whereas polarisation occurs exclusively in transverse waves.]
  6. A radioactive substance decays to 1/16th of its initial mass in 40 days. The half-life of the substance is _________ days.
    a) 20    b) 10    c) 5    d) 2.5
    [Hint: N / N0 = (1/2)n = 1/16 = (1/2)4 ⇒ Number of half-lives n = 4. Half-life T1/2 = Total time (t) / n = 40 / 4 = 10 days.]
  7. Emission of electrons by the absorption of heat energy is called _________ emission.
    a) Photoelectric    b) Field    c) Thermionic    d) Secondary

Part - II: Answer any three questions. Question Number 10 is compulsory (3 × 2 = 6 Marks)

8) Define work function of a metal. Give its unit.

  • Definition: The minimum energy needed for an electron to escape from the metal surface is called the work function (φ0) of that metal.
  • Formula: φ0 = hν0 (where h is Planck's constant and ν0 is threshold frequency).
  • Unit: Its common unit is electron volt (eV) [where 1 eV = 1.6 × 10−19 J] and its SI unit is joule (J).

9) Define Curie.

  • Definition: One curie (1 Ci) is defined as the number of decays per second in 1 gram of radium and it is equal to 3.7 × 1010 decays per second (or disintegrations per second).
  • Relation with SI Unit (Becquerel): 1 Ci = 3.7 × 1010 Bq (where 1 Bq = 1 decay per second).

10) [Compulsory Problem] The radius of the 5th orbit of hydrogen atom is 13.25 Å. Calculate the de Broglie wavelength of the electron orbiting in the 5th orbit.

Given Data:

  • Orbit number (n) = 5
  • Radius of the 5th orbit (r) = 13.25 Å = 13.25 × 10−10 m

Formula:

Condition for stationary orbit: 2πr = nλ ⇒ λ = 2πr / n

Substitution & Calculation:

λ = (2 × 3.14 × 13.25 × 10−10) / 5
λ = 83.21 × 10−10 / 5
λ = 16.64 × 10−10 m = 16.64 Å

Result: The de Broglie wavelength of the electron orbiting in the 5th orbit is λ = 16.64 Å (or 16.64 × 10−10 m).

11) Write any four uses of polaroids.

  1. Polaroids are used in goggles and cameras to avoid glare of light.
  2. They are used in holography (three-dimensional motion pictures).
  3. They are used to improve colour contrast in old oil paintings.
  4. They are used as window glasses in trains and aeroplanes to control the intensity of incoming light (and also in LCD screens and optical stress analysis).

12) Why do we not see the wave properties of a baseball?

  • According to de Broglie hypothesis, the wavelength of matter waves is given by λ = h / mv, which is inversely proportional to the mass (m) of the object.
  • Since a baseball has a very large mass compared to subatomic particles (like electrons) and Planck's constant (h = 6.626 × 10−34 J s) is extremely small, the de Broglie wavelength (λ) associated with the baseball is negligibly small (of the order of 10−34 m) and cannot be observed experimentally.

Part - III: Answer any four questions. Question Number 15 is compulsory (4 × 3 = 12 Marks)

13) Obtain the law of radioactivity.

  • Statement of Law of Radioactive Decay: At any instant t, the number of decays per unit time, called rate of decay (|dN/dt|), is directly proportional to the number of nuclei (N) at the same instant.
  • Mathematically:
    dN / dt ∝ −N
    dN / dt = −λN  —— (1)
    Here, the proportionality constant λ is called the decay constant (SI unit: s−1), and the negative sign indicates that the number of undecayed nuclei N decreases with time t.
  • Rearranging equation (1):
    dN / N = −λ dt  —— (2)
  • Let N0 be the number of undecayed nuclei at time t = 0, and N be the number of undecayed nuclei at any time t. Integrating equation (2) within limits from N0 to N and 0 to t:
    ∫N0N (dN / N) = −λ ∫0t dt
    [ ln N ]N0N = −λt
    ln (N / N0) = −λt
  • Taking exponential on both sides:
    N = N0 e−λt  —— (3)
    This equation is called the law of radioactive decay, which shows that the number of undecayed nuclei decreases exponentially with time.

14) Derive an expression for de Broglie wavelength of electrons.

  • Let an electron of mass m and charge e be accelerated from rest through a potential difference of V volts.
  • The kinetic energy (K) acquired by the electron is given by:
    K = ½mv2 = eV  —— (1)
  • From equation (1), the speed of the electron is:
    v = √(2eV / m)  —— (2)
  • Hence, the de Broglie wavelength (λ) of the electron is:
    λ = h / mv = h / √(2meV)  —— (3)
  • Since kinetic energy K = eV, we can also write: λ = h / √(2mK)
  • Substituting the known constant values (h = 6.626 × 10−34 J s, m = 9.11 × 10−31 kg, e = 1.6 × 10−19 C):
    λ = 12.27 / √V   Å (or 1.227 × 10−9 / √V   m).

15) [Compulsory Question] Show that nuclear density is almost a constant for nuclei with Z > 10.

Derivation & Calculation:

  • Empirically, the radius (R) of a nucleus with mass number A (for Z > 10) is given by:
    R = R0 A1/3   (where R0 = 1.2 × 10−15 m)
  • Assuming the nucleus to be spherical, its volume (V) is:
    V = (4/3)πR3 = (4/3)π(R0 A1/3)3 = (4/3)πR03 A
  • If m is the average mass of a single nucleon (m = 1.67 × 10−27 kg), then the total mass of the nucleus containing A nucleons is:
    Mass of nucleus (M) = A m
  • Formula for Nuclear Density (ρ):
    ρ = Mass of the nucleus / Volume of the nucleus
    ρ = (A m) / [ (4/3)πR03 A ]
    ρ = m / [ (4/3)πR03 ]
  • Since mass number A cancels out, the above expression shows that nuclear density (ρ) is independent of the mass number A.
  • Numerical Value:
    ρ = (1.67 × 10−27) / [ (4/3) × 3.14 × (1.2 × 10−15)3 ] = 2.3 × 1017 kg m−3.

Conclusion: Hence, all nuclei with Z > 10 have an almost constant nuclear density of 2.3 × 1017 kg m−3 regardless of their size or mass number.

16) Discuss about Nicol Prism.

  • Principle: Nicol prism is an optical device designed by William Nicol in 1828, used for producing and analysing plane polarised light. It is based on the phenomenon of double refraction and total internal reflection.
  • Construction: It is made by taking a calcite crystal whose length is three times its breadth. It is cut into two halves along the diagonal with face angles 72° and 108°, and the two halves are pasted together with a layer of Canada balsam, a transparent cement.
  • Working:
    1. When unpolarised monochromatic light enters the calcite crystal, it splits into two plane polarised rays due to double refraction: the ordinary ray (O-ray) with refractive index n = 1.658 and the extraordinary ray (E-ray) with refractive index n = 1.486.
    2. The refractive index of Canada balsam is 1.523, which lies between those of the O-ray and E-ray.
    3. Canada balsam acts as an optically rarer medium for the O-ray, so the O-ray undergoes total internal reflection at the Canada balsam layer and is absorbed at the blackened side of the crystal.
    4. The E-ray is transmitted through the crystal without total internal reflection and emerges out as completely plane polarised light.

17) How do we obtain characteristic X-ray?

  • X-ray spectra show some narrow peaks at specific wavelengths which are characteristic of the target material; hence they are called characteristic X-ray spectra.
  • When a fast-moving electron from the cathode strikes the target, it penetrates the target atom and knocks out a tightly bound inner-shell electron (for example, from the K-shell), creating a vacancy.
  • Immediately, an electron from one of the outer orbits (L, M, N,... shells) jumps into the lower K-shell to fill this vacancy.
  • During this downward transition, the energy difference between the two energy levels is emitted as an X-ray photon of a very specific wavelength:
    • Kα line: Transition from L-shell (n = 2) to K-shell (n = 1).
    • Kβ line: Transition from M-shell (n = 3) to K-shell (n = 1).
  • Similarly, if a vacancy in the L-shell is filled by electrons from M, N,... shells, the L-series of characteristic X-rays is produced.

18) In α-decay, why does the unstable nucleus emit 24He nucleus? Why does it not emit four separate nucleons?

  • After all, 24He consists of two protons and two neutrons. For example, if 92238U nucleus decays into 90234Th by emitting four separate nucleons (two protons and two neutrons), then the disintegration energy Q for this process turns out to be negative (Q < 0).
  • A negative disintegration energy implies that the total mass of the products would be greater than the mass of the parent 92238U nucleus.
  • Such a process cannot occur spontaneously in nature because it would violate the law of conservation of energy.
  • On the other hand, an alpha particle (24He nucleus) has a very high binding energy (28.33 MeV) and much smaller mass than four separate nucleons, making the Q-value positive (Q > 0). Hence, the unstable nucleus emits a single 24He nucleus rather than four separate nucleons.

Part - IV: Answer all the questions (2 × 5 = 10 Marks)

19) a) Explain about compound microscope and obtain the equation for the magnification.

1. Principle & Construction:

  • A compound microscope is used to see tiny objects with much higher magnification than a simple microscope.
  • It consists of two convex lenses:
    1. Objective lens (O): A convex lens of short focal length (fo) and small aperture placed near the object.
    2. Eyepiece (E): A convex lens of comparatively larger focal length (fe) and larger aperture placed near the observer's eye.
  • Both lenses are mounted in a narrow tube with provision to adjust the distance between them.

2. Working & Ray Diagram Description:

  • The object AB is placed at a distance u slightly greater than the focal length of the objective (u > fo).
  • The objective forms a real, inverted, and magnified intermediate image A'B' on the other side of the objective, within the principal focus of the eyepiece.
  • This image A'B' acts as a real object for the eyepiece. The eyepiece acts as a simple microscope and produces an enlarged, virtual, and inverted final image A''B'' (with respect to the original object AB) at the near point D or at infinity.
  • (Diagram Labels to draw: Objective lens fo, Eyepiece fe, Object AB, Intermediate real inverted image A'B', Tube length L between Fo' and A'B', Final magnified virtual image A''B'' at near point D).

3. Step-by-Step Mathematical Derivation for Magnification:

(i) Magnification of the Objective (mo):

  • Linear magnification of the objective is:
    mo = h' / h  —— (1)
  • From the ray diagram, by similar triangles:
    tan β = h / fo = h' / L
    mo = h' / h = L / fo  —— (2)
    Here, L is the distance between the second focal point of the objective and the first focal point of the eyepiece, called the tube length of the compound microscope.

(ii) Magnification of the Eyepiece (me):

  • Since the eyepiece acts as a simple microscope, if the final image is formed at the near point (least distance of distinct vision D), the magnification of the eyepiece is:
    me = 1 + (D / fe)  —— (3)

(iii) Total Magnification (m):

  • The total magnification (m) of the compound microscope is the product of the magnification of the objective and the magnification of the eyepiece (m = mo × me):
Total Magnification (Near Point Focusing):   m = mo me = (L / fo) [ 1 + (D / fe) ]

4. Special Case — Normal Focusing (Final Image at Infinity):

  • If the final image is formed at infinity (normal focusing), the magnification of the eyepiece is me = D / fe. Then the total magnification is:
Total Magnification (Normal Focusing):   m = mo me = (L / fo) (D / fe)

(OR)

19) b) Describe briefly Davisson - Germer experiment which demonstrated the wave nature of electron.

1. Principle:

De Broglie's hypothesis of matter waves was experimentally confirmed by C.J. Davisson and L.H. Germer in 1927. They demonstrated that a beam of electrons undergoes diffraction when scattered by a single crystal of Nickel, similar to X-ray diffraction.

2. Construction & Diagram Description:

  • The filament F is heated by a low tension (L.T.) battery, which emits electrons by thermionic emission.
  • These electrons are accelerated into a fine beam by an aluminium cylinder with fine holes along its axis, connected to a high tension (H.T.) battery of adjustable voltage V.
  • The fine electron beam strikes a single crystal of Nickel (Ni) target.
  • The electrons scattered in all directions by the atoms of the crystal are received by an electron detector (Faraday cylinder) which can be rotated on a circular scale and is connected to a sensitive galvanometer.
  • (Diagram Labels to draw: Filament F with L.T. battery, Electron gun with H.T. battery, Incident electron beam, Nickel target crystal, Diffracted electron beam at angle θ, Movable Electron Detector on circular scale).

3. Working & Experimental Observation:

  • By keeping the accelerating potential (V) constant, the variation of intensity of the scattered electrons with the angle of scattering (θ) is measured.
  • For an accelerating voltage of V = 54 V, the curve of intensity versus scattering angle shows a sharp peak (maximum intensity) at a scattering angle of θ = 50°.
  • This peak is due to the constructive interference of electron waves diffracted from various atomic layers of the target Nickel crystal.

4. Calculation of Wavelength (Verification):

  • (i) From Experimental Diffraction Data: For Nickel crystal, interplanar spacing d = 0.91 Å and for θ = 50°, the wavelength of the electron wave is found to be:
    λ = 1.65 Å
  • (ii) From de Broglie Equation: For an accelerating potential of V = 54 V, the theoretical de Broglie wavelength is:
    λ = 12.27 / √V   Å = 12.27 / √54   Å
λ = 1.67 Å   (Agrees closely with the experimental value of 1.65 Å)

Conclusion: Since the theoretical value (1.67 Å) and experimental value (1.65 Å) are in close agreement, the wave nature of moving electrons is directly confirmed.

20) a) Obtain Einstein's photoelectric equation with necessary explanation. Explain experimentally observed facts of photoelectric effect with the help of Einstein's explanation.

1. Derivation of Einstein's Photoelectric Equation:

  • According to Einstein, when a photon of incident light of energy E = hν strikes a metal surface, its energy is completely absorbed by a single electron inside the metal without any time lag.
  • This absorbed energy is utilized in two ways:
    1. A part of the photon energy is used as work function (φ0) to eject the electron from the metal surface.
    2. The remaining part is imparted as kinetic energy (K) to the ejected photoelectron.
  • By the law of conservation of energy:
    hν = φ0 + K  —— (1)   (where K = ½mv2)
  • If the electron does not lose energy by internal collisions inside the metal, it escapes with maximum kinetic energy (Kmax = ½mvmax2):
    hν = φ0 + Kmax ⇒ Kmax = hν − φ0  —— (2)
  • At the threshold frequency (ν = ν0), the electrons are just ejected with zero kinetic energy (Kmax = 0). Hence, from equation (2):
    φ0 = hν0  —— (3)
  • Substituting equation (3) in equation (2):
Einstein's Photoelectric Equation:   Kmax = ½ m vmax2 = h(ν − ν0)

2. Explanation of Experimentally Observed Facts of Photoelectric Effect:

  1. Effect of Intensity: Each incident photon interacts with a single electron (one-to-one interaction). As the intensity of incident light increases (at constant frequency), the number of photons striking the surface per second increases, so the number of photoelectrons emitted (and saturation photoelectric current) increases proportionally.
  2. Independence of Kmax from Intensity: From Einstein's equation Kmax = h(ν − ν0), the maximum kinetic energy depends only on the frequency (ν) of the single absorbed photon and is completely independent of the intensity of incident light.
  3. Existence of Threshold Frequency (ν0) & Linear Dependence on Frequency: From Kmax = h(ν − ν0), maximum kinetic energy increases linearly with frequency ν. If the incident frequency is less than the threshold frequency (ν < ν0), kinetic energy becomes negative, which is impossible; hence no photoelectric emission occurs below ν0, regardless of how high the intensity is.
  4. Instantaneous Nature (No Time Lag): Photoelectric emission is the result of an elastic collision between a single photon and an electron. Since the entire energy of the photon is absorbed at once by the electron, there is no time lag (< 10−9 s) between the incidence of light and the emission of photoelectrons.

(OR)

20) b) Explain the J.J. Thomson experiment to determine the specific charge of electron.

1. Principle:

The specific charge (e/m) of an electron is determined based on the principle that cathode rays (beam of electrons) are deflected by electric and magnetic fields.

2. Construction & Diagram Description:

  • A highly evacuated discharge tube is used. Cathode rays are produced at the cathode (C) and attracted towards the anode (A) which has a fine pinhole.
  • The narrow beam of cathode rays passes between two parallel metal plates maintained at a high voltage, providing a uniform downward electric field (E).
  • A uniform magnetic field (B) is applied perpendicular to both the electric field and the direction of motion of the cathode rays using electromagnet coils.
  • At the far end of the tube, the cathode rays strike a flat fluorescent screen (zinc sulphide coating) producing a bright spot at O in the absence of fields.
  • (Diagram Labels to draw: Cathode C, Anode A, Electric field plates + and −, Crossed magnetic field B coils, Fluorescent screen with points O, P).

3. Step-by-Step Mathematical Derivation:

(i) Determination of Velocity (v) of Cathode Rays:

  • For a fixed electric field E, the magnetic field B is adjusted such that the upward electrostatic force (FE = eE) is balanced by the downward Lorentz magnetic force (FB = Bev), bringing the spot back to its original undeflected position O.
  • At equilibrium:   FE = FB
    eE = Bev ⇒ v = E / B  —— (1)

(ii) Determination of Specific Charge (e/m):

  • Let V be the potential difference between the cathode and anode. The potential energy (eV) of the electron at the cathode is converted into kinetic energy (½mv2) at the anode.
  • By law of conservation of energy:
    eV = ½mv2 ⇒ e / m = v2 / 2V
  • Substituting velocity v = E / B from equation (1):
Final Expression:   e / m = E2 / (2 V B2)   (SI Unit: C kg−1)

Substituting the known values, the specific charge of the electron is found to be e/m = 1.7 × 1011 C kg−1.


📚 TN 12th Physics 2nd Mid Term 2025 - All Districts Original Question Papers & Answer Keys

Practice more district-wise question papers and full answer keys from the links below to score full marks in your Physics exam: