OMTEX CLASSES: School of Elements

Activity 1.1 (Write your Own Answer)

You all must have been to a shopping mall or a grocery store near your house. Have you observed how the items are stored in the shelves or counters? Is there a particular pattern in which they are kept?
In your house, your mother often asks you to keep your books, clothes and other things in order. How do you arrange them so that you can retrieve them easily when you require them?
Go to your school library. Observe how the books are arranged. Ask your librarian whether any particular method of classification is adopted.

You all know that matter can exist in the form of elements, compounds and mixtures. When elements were discovered, scientists adopted different ways to classify them. In earlier days, very few elements were known. At that time, they were classified as metals and non-metals on the basis of their properties. Some elements showed properties of both metals and non-metals and they could not be placed in any of the two classes. To overcome these difficulties, scientists tried to find out some pattern or regularity in the properties of elements.

1.1 Dobereiner’s Triads
Johann Wolfgang Dobereiner, a German scientist (1780 – 1849) studied as a pharmacist at Munchberg in Germany and then studied chemistry at Strasbourg. He later became professor of chemistry and pharmacy at the University of Jena.
In 1829, he found some groups of three elements which showed similar properties. These groups were called as triads. In these triads, atomic mass of the middle element was approximately the mean of atomic masses of other two elements. Also these elements showed similarities in properties. The table below shows four triads arranged vertically.

Table 1.1
Element	Atomic Mass
Lithium (Li)	6.9
Sodium (Na)	23
Potassium (K)	39
Calcium (Ca)	40.1
Strontium (Sr)	87.6
Barium (Ba)	137.3
Chlorine (Cl)	35.5
Bromine (Br)	79.9
Iodine (I)	126.9
Sulphur (S)	32
Selenium (Se)	79
Tellurium (Te)	128

In the above table, take the triad of Lithium, Sodium and Potassium. The atomic mass of Sodium (23) is the mean of the atomic masses of Lithium and Potassium.
Similarly, you can verify the atomic masses of Strontium, Bromine and Selenium from the other triads.

The triads were known as Dobereiner’s triads.

Dobereiner could identify only some triads from the elements known. Other triads did not obey Dobereiner’s rule. Hence the system of triads was not useful.

1.2 Newlands’ Octaves

Newlands

British chemist Newlands (1837 – 1898) was born in London and studied at Royal college of chemistry. He set up a practice as an analytical chemist in 1864 and in 1868 became chief chemist in a sugar refinery. Later he left the refinery and worked as an analyst.

After the failure of Dobereiner’s triads, the next attempt to classify elements was done by Newlands. By this time 56 elements were discovered. Newlands arranged all these elements in increasing order of their atomic masses. He found that every eighth element had properties similar to that of the first. He compared this to the octave found in music. Therefore his classification was known as “Newlands’ Octaves”.

Newlands’ law states that “When the elements are arranged in an increasing order of their atomic masses, the properties of the eighth element are similar to the first”.

Table 1.2

H	Li	Be	B	C	N	O
F	Na	Mg	Al	Si	P	S
Cl	K	Ca	Cr	Ti	Mn	Fe

Some features of Newlands’ table

Newland could arrange elements only up to calcium out of total 56 elements known.
After calcium every eighth element did not posses properties similar to that of the first.
At the time of Newlands only 56 elements were known. But later several elements were discovered.
In order to fit the existing elements Newland placed two elements in the same position which differed in their properties.
This periodic table did not include inert (noble) gases because they were not discovered.

Activity 1.2 (Answer)

Identify Dobereiner’s triads in Newlands’ table. (Table 1.2) Answer

1.3 Mendeleev’s Periodic Table

Mendeleev

Dimitri Mendeleev, a Russian chemist (1834 -1907) was born at Tobolsk, Siberia. He studied science at St. Petersburg and graduated in 1856. In 1863, he was appointed to a professorship and in 1866 he succeeded to the chair in the university.

Mendeleev examined the relationship between the atomic masses of the elements and their physical and chemical properties. Among chemical properties, he concentrated on the compounds formed by the elements with oxygen and hydrogen as they were very reactive and formed compounds with most elements. By analyzing these compounds, Mendeleev believed that atomic mass of element was the most fundamental property in classifying the elements. He arranged elements in the increasing order of their atomic masses and found that the chemical and physical properties of elements showed repetition after certain intervals. He arranged known elements in the increasing order of their atomic masses in the horizontal row still he encountered an element which had properties similar to the first element. He placed this element below first element and thus started the second row of elements. Proceeding in this manner, he could arrange all known elements according to their properties and thus created the first periodic table containing 63 elements known till then.

His law is known as Mendeleev’s periodic law:

The physical and chemical properties of elements are a periodic function of their atomic masses.

The tabular arrangement of the elements based on the periodic law is called the Mendeleev’s periodic table.

Table 1.3 : Mendeleev's Periodic Table

Table 1.4 : Mendeleev's Periodic Table (with blank spaces)

1.3.1 Main Features of Mendeleev’s Periodic Table

The horizontal rows in the periodic table are called periods. There are seven periods. These are numbered from 1 to 7.
Properties of elements in a particular period show regular gradation from left to right.
Vertical columns in the periodic table are called groups. There are eight groups numbered from I to VIII. Groups I to VII are further divided into A and B subgroups.

1.3.2 Merits of Mendeleev’s Periodic Table

Mendeleev was the first who successfully classified all known elements.
Mendeleev kept some blank places in his periodic table. These vacant spaces were for elements that were yet to be discovered. He also predicted properties of these elements even before they were discovered. Later they were found to be correct. (Table 1.5)
When noble gases were discovered later, they were placed in Mendeleev’s periodic table without disturbing the positions of other elements.

Table 1.5
Predicted element	Actual element discovered later
Eka-boron	Scandium
Eka-aluminum	Gallium
Eka-silicon	Germanium

Table 1.6 : Comparison of properties of eka-aluminium and Gallium
	Eka-aluminium (Ea)	Gallium (Ga)
Atomic weight	About 68	69.72
Density of solid	6.0 g/cm³	5.9 g/cm³
Melting point	Low	29.78ºC
Valency	3	3
Method of discovery	Probably from its spectrum	Spectroscopically
Oxide	Formula: Ea₂O₃ Density: 5.5 g/cm³ Soluble in both acids and alkalies	Formula: Ga₂O₃ Density: 5.88 g/cm³ Soluble in both acids and alkalies

1.3.3 Demerits of Mendeleev’s periodic Table

Hydrogen resembles alkali metals as well as halogens. Therefore, no fixed position could be given to hydrogen in the periodic table.
Isotopes of same elements have different atomic masses; therefore each one of them should be given a different position. On the other hand as isotopes are chemically similar, they had to be given same position.
At certain places, an element of higher atomic mass has been placed before an element of lower mass. For example, cobalt (Co = 58.93) is placed before nickel (Ni = 58.71).
Some element placed in the same sub group had different properties. e. g. Manganese (Mn) is placed with halogens which totally differ in the properties.

Activity 1.3 (Answers)

Consider isotopes of oxygen ¹⁶O and ¹⁸O. Would you be able to place them in Mendeleev’s periodic table?
Find resemblance between hydrogen and alkali metals by writing compounds of both with chlorine, sulphur and oxygen.
Find out a pair of elements from the periodic table where higher mass element is placed before lower mass element.

1.4 Modern Periodic Table

In 1913, Henry Moseley, an English physicist discovered that atomic number is the most fundamental property of an element and not it’s atomic mass. Atomic number (Z) of an element is the number of electrons present in the outer shells. This discovery changed the whole perspective about elements and their properties. Accordingly Mendeleev’s periodic law was modified into ‘Modern periodic Law’.

The modern Periodic Law states “The chemical and physical properties of elements are a periodic function of their atomic numbers”.

The periodic table based on modern periodic law is called the Modern Periodic Table. Many version of this periodic table are in use but the one which is most commonly used is Long Form of Modern Periodic Table.

If you look at the Modern Periodic Table, you will observe that it is not much different from Mendeleev’s periodic table.

Table 1.7 : Modern Periodic Table

Activity 1.4 (Answers)

How are isotopes of different elements placed in the Modern Periodic Table?
What should be the position of Hydrogen in the Modern Periodic Table?
Write the name, symbol and electronic configuration of first ten elements.

1.4.1 Position of elements in the Modern Periodic Table

The horizontal rows in the Modern Periodic Table are called as periods and the vertical columns are called as groups.
The Modern Periodic Table consists of seven periods and eighteen groups.
Periods are numbered from 1 to 7. Elements presenting the same period have same number of shells which is equal to the period number.
In each period a new shell starts filling up. The period number is also the number of shell which starts filling up in it.
The first period is the shortest period containing only two elements. Second and third periods are called as short periods and fifth periods are long periods and containing 18 elements each. Sixth period is the longest and contains 32 elements in it. Seventh period is an incomplete period.
Groups are numbered from 1 to 18. Elements having same number of valence electrons or having same outer electronic configuration are present in the same group.
Elements present in the same group show same chemical properties.
Group 1 contains alkali meals. Group 2 contain alkaline earth metals. Group 17 contains halogens. Group 18 contains inert gases.

Activity 1.5 (Answers)

Write the electronic configuration of elements from atomic number 11 to 18.
What similarities do you find in their electronic configuration?
How many valence electrons are present in sodium, aluminum and chlorine?
Write the electronic configuration of (i) Mg and Ca, (ii) F and Cl.
Do these elements contain same number of valence electrons?
Write electronic configuration of B, O, Na, Al, S and K.

Metals are present on the left hand side of the periodic table, whereas non-metals are present on right side of the periodic table.
Elements present in group 1 and 2 on the left side and 13 to 17 on the right side of the periodic table are normal elements. Their one outermost shell is incomplete.
Elements present in groups 3 to 12 in the middle of the periodic table are called as transition elements. Their two outermost shells are incomplete.
Group 18 on the extreme right of the periodic table contains inert gases. Their outermost shell contains 8 electrons.
Elements placed at the bottom of the periodic table are called as inner transition elements. They contain two series of elements lanthanides and actinides.
14 elements with atomic numbers 58 to 71 (Ce to Lu) are called as lanthanides. These elements are placed along with lanthanum (La = 57) in the same group 3 in period 6 because of very close resemblance in properties between them.
14 elements with atomic numbers 90 to 103 (Th to Lr) are called as actinides. These elements are placed along with actinium (Ac = 89) in the same group 3 in period 7 because of very close resemblance in properties.

Activity 1.6 (Answers)

Classify elements from atomic number 11 to 18 as metals and non-metals depending on the electrons present in the outermost shell.
Write the electronic configuration of Mg, K, Ar and F. Write the electronic configuration of elements from atomic number 11 to 18.

Elements in the modern periodic table are classified on the basis of their electronic configuration. They are divided into four blocks: s–block, p–block, d–block and f–block.
Groups 1 and 2 are included in s–block. These elements contain 1 or 2 electrons in their outermost shell. All these elements are metals.
Groups 13 to 17 and 0 group elements are included in p–block. They contain 3 to 8 electrons in their outermost shell. P–block contains all types of elements, i.e. metals, non–metals and metalloids.
Elements from s–block and p–block are called as normal elements. These elements have outermost shell incomplete except 0 group elements.
0 group elements have completed outermost shell. They are called as inert elements or noble elements. All these elements are gases.
Groups 3 to 12 are known as d–block elements. These elements have two outermost shells incomplete. They are known as transition elements. All these elements are metals.
Elements present at the bottom of the periodic table, i.e. lanthanides and actinides are called as f-block elements. They have three incomplete outermost shells. They are called as inner transition elements. All these elements are metals.

Activity 1.7 (Answers)

Select any 20 elements from all groups.
Identify the block to which each element belongs.
Identify the group to which the element belongs.

1.4.2 Merits of Modern periodic Table over Mendeleev’s periodic Table

All isotopes of the same elements have different masses but same atomic number. Therefore, they occupy the same position in the modern periodic table.
When elements are arranged according to their atomic numbers the anomaly regarding certain pairs of elements in Mendeleev’s periodic table disappears. e. g. atomic number of Cobalt and Nickel are 27 and 28 respectively. Therefore, Cobalt will come first and then Nickel, although its atomic mass is greater.
Elements are classified according to their electronic configuration into different blocks.

1.4.3 Periodic Properties:

The properties which show gradual variation in a group and in a period and they repeat themselves after a certain interval of atomic number are called periodic properties.

Activity 1.8 (Answers)

How do you calculate valency of an element from its electronic configuration?
What is the valency of elements with atomic number 8, 14, 17 and 20?
How does valency vary in a period and in a group?

Atomic Size:

Atomic size is determined using atomic radius. For an isolated atom, atomic radius. For an isolated atom, atomic distance is the distance between the centre of atom and the outermost shell. In a period, atomic radius generally decreases from left to right. This is because the electrons are added to same shell and experience greater pull from the nucleus. Atomic radius increases in a group from top to bottom as new shells are added bringing outermost electrons farther from the nucleus.

Activity 1.9 (Answers)

Atomic radii of elements of third period are given below:

Period 3 elements :	S	Na	Cl	P	Mg	Si	Al
Atomic radius (pm) :	127	190	99	128	160	132	143

Atomic radii of group 17 are given below:

Group 17 elements :	I	F	Cl	Br
Atomic radius (pm) :	133	72	99	114

Metallic and non-metallic properties:

Metals show tendency to lose electrons. Therefore, they are said to be electropositive. Non-metals show tendency to accept electrons or share electrons with another atom. Therefore, they are said to be electronegative. Metallic character deceases and non-metallic character increases from left to right in a period. This is because atomic size decreases. Therefore, the electrons are all metals and on the right of periodic table in the group, lower members are metals. In a group, metallic character increases and non-metallic character decreases from top to bottom. This is because atomic size increases and valence electrons can be easily removed. In group 14, first element is carbon (C) which is non-metal, next two elements silicon (Si) and germanium (Ge) are metalloids and remaining elements Tin (Sn) and Lead (Pb) are metals. In the modern periodic table, a zig-zag line separates metals from non-metals. The borderline elements i.e. boron (B), Silicon (Si), Germanium (Ge), Arsenic (As), Tellurium (Te) and Polonium (Po) show intermediate properties and are called as metalloids or semi-metals.

OMTEX CLASSES

Main Menu

School of Elements